Salerno Surgical Kit

ATTENTION: This item is NOT a LARP weapon, but a prop. It´s not suitable for combat.
Disclaimer: The item shown here was especially designed to safely portray treatments in controlled environments like liveroleplay events, theater stages etc.. The items are made from hadened rubber without a core and are absolutely not suitable for unscripted combat

Mytholon's popular surgical tools are made out of hardened rubber: The set includes two scalpels, an arrow probe and a hook for wounds.

A "must have" for all medieval surgeons and healers.

We recommend the Salerno bone saw to complete the kit for acceptable use at most games, and a Salerno rollbag for the transport of this nice bundle.

The matching bag to Mytholon's Salerno surgical set. It has five pouches for all surgical instruments and the bone saw. Rolled up it is handy in use and transportation.

... You've got red on you.

This Epic Armoury Effect Blood is one of our cosmetic products used to create gorey makeup and costume effects. Made from corn starch and a careful mix of gel and colouring, this Effect Blood comes in a 100 ml or 500 ml bottle and can be used to create many fun and intense scenes!

Create a wound or other terrifying prop with this fake blood, or use it to stain your bandages and healing kit for a realistic effect on the battlefield.

Directions for use:

Apply this gel using a brush or sponge. Great for use on the face, but can also be used all over the body. Can also be used to coat props and costuming.

Removal:

This Effect Blood is water soluble. Remove it with mild soap and warm water.

Epic Armoury’s Collodium is the non-flexible form of collodion, a syrupy solution made from pyroxylin in an ether and alcohol solvent. This rigid collodion is great for theatrical makeup effects, including:

• scarring,
• wrinkles, and
• burns

Directions for use:

Apply a thin layer of collodion to fleshy skin and allow it to dry completely. You will feel the collodion tighten and pull and pucker the skin where applied. The looser the skin, the more dramatic effect you can achieve! It is especially noticeable on cheeks, and can be layered with multiple dried coats to get deeper lines.

Add to the look with some water-based makeup by adding some pink for a new scar, or brown for an old one. Use powder to remove any lasting shine and finish with setting spray.

Removal:

Repeated application of rigid collodion to the same spot can cause damage to the skin and actual scarring. Safely remove the dried film by using Collodion Remover and cotton balls. Soak the cotton balls in the oily remover and wipe at the collodion effect until it peels off gently.

IMPORTANT NOTE: Be careful when applying collodion to avoid the eyes and mouth. Apply in a well ventilated area. Keep away from open flames, as this product is highly flammable.

Description

This leather scabbard with velvet covering is a specially developed accessory for our Athena latex weapons.It is a narrow scabbard that holds the weapon firmly in place and provides minimal friction with the latex to protect against premature wear in LARP.  Made of dyed leather and decorated with laser engraving, it is also an elegant accessory for your LARP costumes. Ideal for any medieval warrior, soldier, knight or adventurer.

Sizes

• Length: 11 in (28 cm) - Blade length
• Width : 3.25 in (8 cm)
• Belt strap width : 4 in (10 cm)

Characteristics

• Created for Athena's Ritual Knife
• Ambidextrous
• Laser engravings
• Protective velvet
• Brass plated rivets
• 8-9 oz, 5-6 oz, and 4-5 oz leather

Made in Quebec, Canada, by Les Artisans d'Azure, for Nemesis Workshops

The Athena line, from Nemesis Workshops, is a mass produced line of high quality LARP weapons.

Athena is a new thermoforming manufacturing process that we have developed in order to offer high quality products at the cutting edge of technology. 

Thanks to this new process, Nemesis has taken the quality of their products to a higher level. Safer due to reinforced tips, durable due to quality materials and foam fusion during thermoforming, incredible balance due to the weighting system in the handles, flawless blades due to high precision molds, and daggers ready to parry due to a more robust fiberglass rod.

Not covid preventative, but still good to wear to the supermarket.

The Carcassone book holder is perfect for carrying your spell books, research, prayers or diaries. Made of high quality national leather, it has three buckles so you can adapt it to the size of your book!

Minimum size: 17x17cm
Maximum size: 23x23cm
Up to 10cm thick.

Rawblade is a B2B company focused on the world of medieval reenactment and LARP. Rawblade contributes to the market with their know-how of Spanish crafts, a long tradition of furs and leather, as well as steel. Inspired by the famous Toledo steel, Rawblade develops a set of armours and chainmails.

The human team behind Rawblade is formed from the experience acquired at EvilTailors, as well as the various platforms that have been integrated into its collective over time. The hard work, designs, and ideas that make up the Rawblade catalogue are the result of inspiration in the world of medieval fantasy that has accompanied them since childhood. We believe Rawblade offers a quality wardrobe at a very competitive price.

Rawblade attempts to use products and producers primarily from Spain. All their leather goods are made 100% in Spain adding the seal of quality to the crafts. Their foam creations, clothes, and steel are designed and made in Spain and India.

This creature's origin is unknown, as well as its intentions... but they're, definitely, not good.

• 100% latex free!
• Made of flexible polyurethane foam,
• completely safe.
• High quality colored for maximum durability

Rawblade is a B2B company focused on the world of medieval reenactment and LARP. Rawblade contributes to the market with their know-how of Spanish crafts, a long tradition of furs and leather, as well as steel. Inspired by the famous Toledo steel, Rawblade develops a set of armours and chainmails.

The human team behind Rawblade is formed from the experience acquired at EvilTailors, as well as the various platforms that have been integrated into its collective over time. The hard work, designs, and ideas that make up the Rawblade catalogue are the result of inspiration in the world of medieval fantasy that has accompanied them since childhood. We believe Rawblade offers a quality wardrobe at a very competitive price.

Rawblade attempts to use products and producers primarily from Spain. All their leather goods are made 100% in Spain adding the seal of quality to the crafts. Their foam creations, clothes, and steel are designed and made in Spain and India.

The smell of disease is rancid in the streets, but you are the Plague Doctor. All you smell are the fresh lemon balm and rose hips in your mask, protecting you from the lethal miasma of the dying.

The Plague Doctor Mask is your protection from the dangers of the world's illness, shielding you just as a knight's armor protects him from a fatal strike. To everyone else, you are a symbol of knowledge and healing...but also the harbinger of death. Looking into the blackness of your mask's eyes feels like exposing one's soul, and so even your patients harbor fear at your presence.

DETAILS

With an adjustable leather strap and two fabric ties, Epic Armoury’s Plague Doctor Mask is made to fit anyone. Made from natural full-grain quality leather and sturdy stitching, this is a product that can withstand the abuse of a LARP or reenactment with regular leather care. And with the colour dyed into the material, it has a particularly fine finish.

HISTORY

• Originally designed in 17th century Europe by Charles de L’Orme
• Worn by “Plague Doctors” who took care of the sick and dying
• Long beak-like nose was filled with herbs and straw to filter out the "bad air"

Hey! Hey, listen!

It's dangerous to go alone!

Buy this!

Now available in multiple editions!

Please note, the blue variant of the Masterful Sword is a different production than the other colour variants and the handle is a lighter blue than in the images provided.

Please note: This item is not permissable for use at many LARP games. It is suitable for Cosplay, but it is not designed with battle games in mind.
We do not provide refund for purchase of items that are inappropriate for your games' needs.

Wicked Replicas range of ‘battle’ ready play weapons are unlike anything you’ve seen before. Fun, safe and durable, they are made from quality rubber and hand finished for an authentic battle worn look.

Wicked Replicas play weapons look so realistic you almost need to look twice before running your hand down the blade of our Samurai Sword. You won’t get splinters from our Ogre’s Club or split in two by our Axe of Doom. Our entire range has been tested for safety and durability.

Please note: Your game system may not allow Wicked Replicas during play. Of Science & Swords provide no refund to customers that have made purchase in error.

You're five year old will love it as it provides all the hugging they could want, and your friends will love watching your child squeel with delight that certainly isn't terror as they get why it's so hilarious.

Alien Facehugger Plush

• Always happy to see you!
• Cute and cuddly
• Poseable "fingers"
• Fills your chest with love

ThinkGeek started as an idea. A simple idea to create and sell stuff that would appeal to the thousands of people out there who were on the front line and in the trenches as the Internet was forged. ThinkGeek started as a way to serve a market that was passionate about technology, from programmers, engineers, students, lovers of open source, to the masses that helped create the behind-the-scenes Internet culture. Three out of the four founding ThinkGeek members started an ISP in the Northern Virginia area way way back in 1995. We couldn't afford Solaris, learned about a free UNIX-like OS, and spent almost an entire day downloading it onto over 50 floppies for installation on an old 486 laptop with no cd-rom (thanks Slackware!). After a few years with the ISP gig, the ThinkGeek idea popped into our heads, and, operating out of a spare room at the ISP office we setup shop and launched the site on Friday the 13th, 1999... All the founding members are still in town, and we've continued to grow our product line, expand our staff (including several canines) and enhance the way we interface with customers. Who would have thought...

Half-Life 2 Gravity Gun 1:1 Scale Prop Replica

:

• You know you want one.
• The Gravity Gun from Half-Life 2 in full scale!
• Zero Point Energy Field Manipulator measures 2-feet long.
• Features glowing orange LEDs and 4 unique sounds taken directly from the video game!

Created directly form the digital data supplied by Valve and fully accurate and authentic to the model from Half-Life 2, it's the Half-Life 2 Gravity Gun 1:1 Scale Prop Replica! The Gravity Gun, also known as the Zero Point Energy Field Manipulator, is a full-size, 1:1 scale model of the tractor-beam weapon featured in the Half-Life video games. It measures nearly 2-feet long and features glowing orange LEDs, 2 handles, 2 triggers, and 4 unique sounds directly from the video game. As a bonus, a carefully concealed fold-away kick-stand allows you to display your Gravity Gun on the shelf or desktop when not in use. Requires 3x "C" batteries, not included. 

Founded in 1985 and based in New Jersey, NECA (National Entertainment Collectibles Association) is a worldwide leader in the design, development, and marketing of collector toys and consumer products. Its many first-class offerings cover a spectrum of genre, licensed properties, and types of merchandise, and are sold in more than 50 countries on 6 continents. In NECA’s gigantic selection, there really is “something for everyone”!