Edward Full Arms

The full armguard from the "Edward" series is big enough to be worn on top of a gambeson and even the padded jacket with an additional chain mail.

The upper part is being fixed to the spaulders on the inner side. The arm guard itself is then fitted to the wearers arm by the straps and buckles on upper arm, elbow and forearm.

The inner elbow is being protected by the "shell", as the plate piece on the outside of the guard is called. The forearm is closed inside a two-piece pipe - you will not need any bracers in addition to this piece here.

These bracers are made with a cut out for the inner elbow, so that the wearer can bent his arm all the way without the bracers interfearing with the movement. Additionally they are built with a ridge along the edge and a surrounding pattern of rivets.

The bracers have a bigger inner diameter, so that they can be worn on top of a gambeson and even a chain mail. A great way to built up a heavy plate armour.

The matching helmet to our armor series Edward. Its design is based on historical great helmets, but with more dynamic shaped eye slits. Like all pieces from this series the offset beading and the decorative rivets make it a real eye-catcher.

The helmet has a circumference of 60cm to 62cm, so it is made for larger heads.

The matching helmet to our armor series Edward. Its design is based on historical great helmets, but with more dynamic shaped eye slits. Like all pieces from this series the offset beading and the decorative rivets make it a real eye-catcher.

The helmet has a circumference of 60cm to 62cm, so it is made for larger heads.

The matching thigh protection for our armor series Edward. They can be attached at the outside of the breastplate with two buckle straps and thus complete the look of the whole set of armor.

These greaves were built with a bigger inner diameter to be worn by bigger heroes and on top of padded leg protection. They have a beading surrounding the edge, just as well as rivets for decoaration.

The foot part is cut out lower, so they can rest comfortably on the foot and protect the ankles. The swung shape of the greaves makes them look even more exclusive. They are being closed with two buckle-straps.

The matching thigh protection for our armor series Edward. They can be attached at the outside of the breastplate with two buckle straps and thus complete the look of the whole set of armor.

These greaves were built with a bigger inner diameter to be worn by bigger heroes and on top of padded leg protection. They have a beading surrounding the edge, just as well as rivets for decoaration.

The foot part is cut out lower, so they can rest comfortably on the foot and protect the ankles. The swung shape of the greaves makes them look even more exclusive. They are being closed with two buckle-straps.

These bracers are made with a cut out for the inner elbow, so that the wearer can bent his arm all the way without the bracers interfearing with the movement. Additionally they are built with a ridge along the edge and a surrounding pattern of rivets.

The bracers have a bigger inner diameter, so that they can be worn on top of a gambeson and even a chain mail. A great way to built up a heavy plate armour.

Bigger is Bad Arse-r!

This massive pair of pauldrons has been built with additional sword breakers attached on top of the shoulder. The spaulders are built from two parts (shoulder and upper arm) and attach to an exsisting breastplate to hold them in place.

The spaulders are made in the style of the "Edward" armour: a ridge along the edge and many decorative rivets surrounding it. The pieces for the upper arm are something very special: they are built anatomically, so that they rest on the upper arm very tight and comfortably.

The "Edward" armour is inspired by the typical armours of the high middle ages.

The segmented breast plate is very agile. It is dominated by dynamically upswung lines. Ornamental beading and riveting give the armor a noble but also intimidating character. The tassets of the "Edward" series can be mounted in straps on the bottom segment of the chest plate. This armor is suitable for the representation of paladins and knights as well as for mercenary or adventurers. It can be combined with any spaulder from our assortment.

The recommended abdominal circumference is 126 cm (including padded clothing) – but the armour can be widened by side-mounted leather straps up to a maximum of 144 cm. The length is 74 cm.

The "Edward" series full leg guards was built large enough even for bigger heroes. This way it can be worn even on top of padded thigh guards and completes many full plate armours.

It is being tied to the wearer by using a belt for the two laces and attached to the leg and knee with buckle-straps.

The knees outer side is closed by a shell (knee-plate), so that blows and strikes can not cut the important parts.

The leg guards ends just below the knee and can therefore be worn with greaves or seperatly: both ways are possible and depend on the wearers' decision.

Intimidation. It’s your main form of weaponry while facing the heroes, because it gives you full control. When your enemies fear you, they are more likely to make fatal mistakes.

Your Dark Drake Armour is as dark as your intentions, hardened by the evil magic your subjects provide. As you withdraw your sword, sizing up the quivering soldier who feels brave enough to stand against you, you begin to laugh. This will be a very brief fight--if you can even call it that. The little man looks barely strong enough to hold up his hammer.

DETAILS

Epic Armoury’s Dark Drake Breastplate is a finely sculpted piece of armour that protects the front of the torso, chest and abdomen. Sculpted to fit the body and add structural strength to the steel, this galvanized steel piece has been decorated to mimic reptilian scales. The plate rests at the hips and has a V-shaped flange--or sword turner--that deflects blows from the weak spot where torso and leg armour fit together. The armour is made from rolled mild steel treated with Epic Armoury’s Epic Dark Metal coat, which gives the armour a rugged, antique finish.

The Dark Drake Breastplate is designed to match Epic Armoury’s Dark Drake Armour, but is fully usable with other Epic Armoury metal products, giving you the freedom to customize your character’s costume. Made of 1 mm thick galvanized mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care. 

HISTORY

• Plate armour became more popular as firearm technology became more prevalent during the 13th century
• Historically designed with sculpted ridges to provide reinforced protection and to deflect attacks on a chaotic battlefield

Intimidation. It’s your main form of weaponry while facing the heroes, because it gives you full control. When your enemies fear you, they are more likely to make fatal mistakes.

Your Dark Drake Armour is as dark as your intentions, hardened by the evil magic your subjects provide. As you withdraw your sword, sizing up the quivering soldier who feels brave enough to stand against you, you begin to laugh. This will be a very brief fight--if you can even call it that. The little man looks barely strong enough to hold up his hammer.

DETAILS

Epic Armoury’s Dark Drake Breastplate is a finely sculpted piece of armour that protects the front of the torso, chest and abdomen. Sculpted to fit the body and add structural strength to the steel, this galvanized steel piece has been decorated to mimic reptilian scales. The plate rests at the hips and has a V-shaped flange--or sword turner--that deflects blows from the weak spot where torso and leg armour fit together. The armour is made from rolled mild steel treated with Epic Armoury’s Epic Dark Metal coat, which gives the armour a rugged, antique finish.

The Dark Drake Breastplate is designed to match Epic Armoury’s Dark Drake Armour, but is fully usable with other Epic Armoury metal products, giving you the freedom to customize your character’s costume. Made of 1 mm thick galvanized mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

HISTORY

• Plate armour became more popular as firearm technology became more prevalent during the 13th century
• Historically designed with sculpted ridges to provide reinforced protection and to deflect attacks on a chaotic battlefield

Your squire buckles the straps of your custom-fit Gothic Half Armour, adjusting it to be comfortable and snug over your gambeson. You paid top coin for this suit of plate, and you expect people will be impressed when they see how it shines on the battlefield.

Your blacksmith assured you that the Gothic Half Armour design was the latest in technology, able to withstand and deflect attacks--even arrows from the enemy’s bows. You are a mighty warrior, indeed, to be the owner of such fine craftsmanship. A fitting symbol of your godly-given status.

DETAILS

This bestselling armour is made for the upper crust of the battlefield, featuring front and backplates, faulds and tassets. The breast plate has a central crease and ridges around the rim. The armour is a close fit to the arms and throat to minimize the number of weak spots. The matching breast and backplates extend below the abdomen, connecting to the tassets beneath the protection of the faulds: a series of overlapping, modelled metal plates protecting the weak spots at the pelvis.

Made from mild steel with rolled edges and top-grain leather straps and fittings, this Gothic Half Armour is built to withstand the abuse of a LARP or reenactment while keeping the user safe and comfortable. With regular leather and metal armour care, you can expect this armour set to last for a long time!

HISTORY

• Gothic style historically developed in the 1420-1440s thanks to technological advances
• Characterized by the curves, flutes and ridges, which strengthened the armour and deflected projectiles

You look upon your leading officer as he makes his way down the line of your fellow soldiers. Your fate and the fate of your entire unit is dependent on this veteran’s word, and you find yourself relieved not to shoulder such a heavy burden.

“We must fight!” your officer shouts for all to hear. You adjust your Warrior Leg Protection, double checking the buckles as you listen to him continue. “For our homes and for our families, we will fight until we can fight no more!” With a resounding cheer, your fellow soldiers ready themselves for the charge. You withdraw your weapon, eager and afraid all at once.

The battle has begun.

DETAILS

Epic Armoury’s Warrior Leg Protection is a set of demi-greaves designed to protect the shins. Rounded at the edges and decorated with shiny steel rivets, these demi-greaves are designed to sit comfortably over the shins while leaving room for poleyns to cover the kneecaps. They reach from below the knee and narrow around the ankles, secured with a top-grain leather straps below the knee and another above the ankles.

The Warrior Leg Protection demi-greaves are neutral in style and fully usable with other Epic Armoury metal products, giving you the freedom to customize your character’s costume. Made of 1 mm thick mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

HISTORY

• Plate armour became more popular as firearm technology became more prevalent during the 13th century
• May also be referred to as a “schynbald,” only protecting the front of the lower leg