Edward Full Legs

The "Edward" series full leg guards was built large enough even for bigger heroes. This way it can be worn even on top of padded thigh guards and completes many full plate armours.

It is being tied to the wearer by using a belt for the two laces and attached to the leg and knee with buckle-straps.

The knees outer side is closed by a shell (knee-plate), so that blows and strikes can not cut the important parts.

The leg guards ends just below the knee and can therefore be worn with greaves or seperatly: both ways are possible and depend on the wearers' decision.

These bracers are made with a cut out for the inner elbow, so that the wearer can bent his arm all the way without the bracers interfearing with the movement. Additionally they are built with a ridge along the edge and a surrounding pattern of rivets.

The bracers have a bigger inner diameter, so that they can be worn on top of a gambeson and even a chain mail. A great way to built up a heavy plate armour.

The matching helmet to our armor series Edward. Its design is based on historical great helmets, but with more dynamic shaped eye slits. Like all pieces from this series the offset beading and the decorative rivets make it a real eye-catcher.

The helmet has a circumference of 60cm to 62cm, so it is made for larger heads.

The matching helmet to our armor series Edward. Its design is based on historical great helmets, but with more dynamic shaped eye slits. Like all pieces from this series the offset beading and the decorative rivets make it a real eye-catcher.

The helmet has a circumference of 60cm to 62cm, so it is made for larger heads.

The matching thigh protection for our armor series Edward. They can be attached at the outside of the breastplate with two buckle straps and thus complete the look of the whole set of armor.

These greaves were built with a bigger inner diameter to be worn by bigger heroes and on top of padded leg protection. They have a beading surrounding the edge, just as well as rivets for decoaration.

The foot part is cut out lower, so they can rest comfortably on the foot and protect the ankles. The swung shape of the greaves makes them look even more exclusive. They are being closed with two buckle-straps.

The matching thigh protection for our armor series Edward. They can be attached at the outside of the breastplate with two buckle straps and thus complete the look of the whole set of armor.

These greaves were built with a bigger inner diameter to be worn by bigger heroes and on top of padded leg protection. They have a beading surrounding the edge, just as well as rivets for decoaration.

The foot part is cut out lower, so they can rest comfortably on the foot and protect the ankles. The swung shape of the greaves makes them look even more exclusive. They are being closed with two buckle-straps.

These bracers are made with a cut out for the inner elbow, so that the wearer can bent his arm all the way without the bracers interfearing with the movement. Additionally they are built with a ridge along the edge and a surrounding pattern of rivets.

The bracers have a bigger inner diameter, so that they can be worn on top of a gambeson and even a chain mail. A great way to built up a heavy plate armour.

Bigger is Bad Arse-r!

This massive pair of pauldrons has been built with additional sword breakers attached on top of the shoulder. The spaulders are built from two parts (shoulder and upper arm) and attach to an exsisting breastplate to hold them in place.

The spaulders are made in the style of the "Edward" armour: a ridge along the edge and many decorative rivets surrounding it. The pieces for the upper arm are something very special: they are built anatomically, so that they rest on the upper arm very tight and comfortably.

The "Edward" armour is inspired by the typical armours of the high middle ages.

The segmented breast plate is very agile. It is dominated by dynamically upswung lines. Ornamental beading and riveting give the armor a noble but also intimidating character. The tassets of the "Edward" series can be mounted in straps on the bottom segment of the chest plate. This armor is suitable for the representation of paladins and knights as well as for mercenary or adventurers. It can be combined with any spaulder from our assortment.

The recommended abdominal circumference is 126 cm (including padded clothing) – but the armour can be widened by side-mounted leather straps up to a maximum of 144 cm. The length is 74 cm.

The full armguard from the "Edward" series is big enough to be worn on top of a gambeson and even the padded jacket with an additional chain mail.

The upper part is being fixed to the spaulders on the inner side. The arm guard itself is then fitted to the wearers arm by the straps and buckles on upper arm, elbow and forearm.

The inner elbow is being protected by the "shell", as the plate piece on the outside of the guard is called. The forearm is closed inside a two-piece pipe - you will not need any bracers in addition to this piece here.

The most gracious Bone Queen has granted you eternal life. She is the creator and goddess of the Undead Flesh, and she demands the extinction of every settler! Without tiring and with the constant assistance of the necromancers, you will personally see that every one of the mortal settlers be vanquished.

You are one of the Bone Queen’s corpse warriors, a Loyal, and it is with your help that the Undead Flesh will one day reconquest their own lands.

DETAILS

Epic Armoury’s CQ Undead Full Legs is an essential for any person wanting to protect the legs while in battle. Consisting of cuisses to protect the lower thighs, poleyns covering the knees, and short demi-greaves protecting the upper shins, you’re less likely to take a pesky arrow to the knee--thus increasing your adventuring days. Due to the Full Leg’s austere style, this armour solution is particularly well suited for a dark and serious character with ill-intention. While specifically designed for ConQuest’s Non-Player Character group, the Undead Flesh, feel free to use this armour to fit your own character’s design.

Three leather straps--one around the thigh, one below the knee, and one to attach to the belt--are used to keep each piece in place. Made of 1 mm galvanized mild steel and top-grain leather straps and fittings, these armour pieces are built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

HISTORY

• Plate armour became more popular as firearm technology became more prevalent during the 13th century
• Historically designed with sculpted ridges and overlapping plates to provide reinforced protection and to deflect attacks on a chaotic battlefield
• Used as the uniform of choice for Undead Flesh, an NPC group of enemies within the ConQuest universe

A simple, but effective, armour for thigh and knee. 
Easy to combine with greaves, it offers good protection for your weaker part of the armoured body.
The armour is strapped to the wearers hip by using belts and can be adjusted to the bodylength individually.
The entire armour consists of eight pieces each and is therefore very flexible.

The breastplate from the "Elias" series is kept simple and functional.

These full leg plate armours are blank and protect your legs from ankle to the upper thigh. 

The knees have a joint and therefore do not interfere with movement.

Six, Seven, my legs shan't take me to heaven

Nine, Ten, I pray I make it back again

Practical Plate protection for the common soldier

Epic Armoury’s Soldier Leg Protection are a pair of greaves, perfect for the Larp character that wants to have hints of historical designs. The greaves are designed to protect the front of the shins and down to the ankles and, due to overlapping plate design, has little impact on mobility. This low-fantasy design is meant to fit an assortment of characters, and is inspired by historical medieval armour. It’s simple form comes in a range of sizes, and can easily be used by most people thanks to its design. 4 leather straps wrapped around the back of your thigh and lower leg with additional tie strings that tie together with your gambeson make sure that the Soldier Leg Protection will remain fastened, no matter what

Made of polished 1 mm thick steel and chrome leather straps, this armour is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

Inspired by Medieval History

• Historically designed with sculpted ridges and overlapping plates to provide reinforced protection and to deflect attacks on a chaotic battlefield
• Plate armour became more popular as firearm technology became more prevalent during the 13th century

Not quite a Necromonger yet, but you'll still cry "Death! Death! Death!" unti lthe sun shines morning.

Mytholon enters the market for more premium armour designs with the neautifully hand crafted Dragomir armour.

None shall accuse you of giving them the cold shoulder because you'll have torn out their tongues.

The "Dragomir" plate armor is incredibly elaborate. It consists of a multitude of lames and finely shaped elements which, when combined, result in extraordinary armor that can hardly be more agile. Every part by "Dragomir" is carefully flanged, decorated with beads and coordinated with one another. They impress with their shape and the masterful execution that makes this armor so unique.

If you like it a little less decorated and want to save some money, you should check out "Dragomir's" brother "Rikomer". Technically identical, "Rikomer" dispenses the decorative beads in favor of a more brutal look and a lower price.

Armor like this is usually only available as a custom-made product and Mytholon had to fiddle a long time before they could get it ready for series production. Of course, the fit must and can be optimized here and there by careful bending, but Mytholon have designed the armor in such a way that it can be carried into the field with maximum comfort.

The individual parts of the Dark varient are burnished to protect against rust and are particularly suitable for dark knights or fighters of chaos.

Steel varient "Dragomir" is particularly suitable for dragon knights or fighters of light.

We generally recommend wearing a gambeson and arm & leg paddings under plate armor. This significantly improves wearing comfort and protection.

TAKE A STAND!

The sergeant was fast and skilled with a sword. But he was also young and clearly did not expect the unexpected. The captain avoided a few strikes and made a pirouette followed by a seeming half-hearted thrust, which the sergeant parried with triumphant ease. But the following armoured knee bash sent him instantly coughing to the ground. The senior officer peered at his defeated subordinate and responded with an approving nod.

The Captain Leg Protection is an essential part of the Captain Armour Complete Set to emphasise servitude and privilege and is available in glorious Polished Steel and grim Epic Dark. It is fitted with leather straps that can be attached to a belt. The Captain Leg Protection is part of the Captain Armour Complete Set and is intended to pair with the Captain Cuirass, Captain Pauldrons, Captain Arm Protection and Captain Belt Shields.

Two tone is the height of fashion, even on the battlefield!

The official leggings of Conquest '09, these stylish 18guage steel will keep your legs from sustaining flesh wounds or worse! And the best part is no one will be able to tell if you shaved that morning!

You are a Rahk of the Black Ice Essence, a physical manifestation of perfection and complete unification. You march in unison and you fight in unison with all the soldiers and the officers of your unit. Together you are efficient.

The mortal races will all become assimilated in time. When everyone becomes an aspect of your Essence, the world will finally be perfect.

DETAILS

Epic Armoury’s Black Ice Full Legs armour is an essential for any person wanting to protect the legs while in battle. Consisting of cuisses to protect the lower thighs, black painted poleyns covering the knees, and half black demi-greaves protecting the upper shins (Does NOT include greaves), you’re less likely to take a pesky arrow to the knee--thus increasing your adventuring days. Due to the Full Leg’s austere style, this armour solution is particularly well suited for a dark and serious character with ill-intention. While specifically designed for ConQuest’s Non-Player Character group, the Black Ice, feel free to use this armour to fit your own character’s design.

Three leather straps--one around the thigh, one below the knee, and one to attach to the belt--are used to keep each piece in place. Made of 1 mm thick mild steel and top-grain leather straps and fittings, these armour pieces are built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care. Please note that you have to purchase the "Black Ice Arm & Leg Protection Set" [Item no:801402] in order to complete a full leg protection.

INSPIRATION

• Used as the uniform of choice for Black Ice infantry, a NPC group of enemies within the ConQuest universe
• Made from the Essence of Black Ice, according to ConQuest lore