Edward Cuirass

The "Edward" armour is inspired by the typical armours of the high middle ages.

The segmented breast plate is very agile. It is dominated by dynamically upswung lines. Ornamental beading and riveting give the armor a noble but also intimidating character. The tassets of the "Edward" series can be mounted in straps on the bottom segment of the chest plate. This armor is suitable for the representation of paladins and knights as well as for mercenary or adventurers. It can be combined with any spaulder from our assortment.

The recommended abdominal circumference is 126 cm (including padded clothing) – but the armour can be widened by side-mounted leather straps up to a maximum of 144 cm. The length is 74 cm.

These bracers are made with a cut out for the inner elbow, so that the wearer can bent his arm all the way without the bracers interfearing with the movement. Additionally they are built with a ridge along the edge and a surrounding pattern of rivets.

The bracers have a bigger inner diameter, so that they can be worn on top of a gambeson and even a chain mail. A great way to built up a heavy plate armour.

The matching helmet to our armor series Edward. Its design is based on historical great helmets, but with more dynamic shaped eye slits. Like all pieces from this series the offset beading and the decorative rivets make it a real eye-catcher.

The helmet has a circumference of 60cm to 62cm, so it is made for larger heads.

The matching helmet to our armor series Edward. Its design is based on historical great helmets, but with more dynamic shaped eye slits. Like all pieces from this series the offset beading and the decorative rivets make it a real eye-catcher.

The helmet has a circumference of 60cm to 62cm, so it is made for larger heads.

The matching thigh protection for our armor series Edward. They can be attached at the outside of the breastplate with two buckle straps and thus complete the look of the whole set of armor.

These greaves were built with a bigger inner diameter to be worn by bigger heroes and on top of padded leg protection. They have a beading surrounding the edge, just as well as rivets for decoaration.

The foot part is cut out lower, so they can rest comfortably on the foot and protect the ankles. The swung shape of the greaves makes them look even more exclusive. They are being closed with two buckle-straps.

The matching thigh protection for our armor series Edward. They can be attached at the outside of the breastplate with two buckle straps and thus complete the look of the whole set of armor.

These greaves were built with a bigger inner diameter to be worn by bigger heroes and on top of padded leg protection. They have a beading surrounding the edge, just as well as rivets for decoaration.

The foot part is cut out lower, so they can rest comfortably on the foot and protect the ankles. The swung shape of the greaves makes them look even more exclusive. They are being closed with two buckle-straps.

These bracers are made with a cut out for the inner elbow, so that the wearer can bent his arm all the way without the bracers interfearing with the movement. Additionally they are built with a ridge along the edge and a surrounding pattern of rivets.

The bracers have a bigger inner diameter, so that they can be worn on top of a gambeson and even a chain mail. A great way to built up a heavy plate armour.

Bigger is Bad Arse-r!

This massive pair of pauldrons has been built with additional sword breakers attached on top of the shoulder. The spaulders are built from two parts (shoulder and upper arm) and attach to an exsisting breastplate to hold them in place.

The spaulders are made in the style of the "Edward" armour: a ridge along the edge and many decorative rivets surrounding it. The pieces for the upper arm are something very special: they are built anatomically, so that they rest on the upper arm very tight and comfortably.

The full armguard from the "Edward" series is big enough to be worn on top of a gambeson and even the padded jacket with an additional chain mail.

The upper part is being fixed to the spaulders on the inner side. The arm guard itself is then fitted to the wearers arm by the straps and buckles on upper arm, elbow and forearm.

The inner elbow is being protected by the "shell", as the plate piece on the outside of the guard is called. The forearm is closed inside a two-piece pipe - you will not need any bracers in addition to this piece here.

You look upon your leading officer as he makes his way down the line of your fellow soldiers. Your fate and the fate of your entire unit is dependent on this veteran’s word, and you find yourself relieved not to shoulder such a heavy burden.

“We must fight!” your officer shouts for all to hear. You adjust your Milanese Armour, double checking the buckles as you listen to him continue. “For our homes and for our families, we will fight until we can fight no more!” With a resounding cheer, your fellow soldiers ready themselves for the charge. You withdraw your weapon, eager and afraid all at once.

The battle has begun.

DETAILS

Epic Armoury’s Milanese Armour is a simple low-fantasy piece of armour protecting the front of the torso and abdomen. The plate rests at the waist and is sculpted to fit the body and add structural strength to the steel. This steel riveted piece has been polished to a high-gloss finish to appeal to the knights in shining armour.

The Milanese Armour is embellished with a beveled plate on the chest to deflect attacks. It is fully usable with Epic Armoury’s Faulds and Tassets and well as other metal work products, giving you the freedom to customize your character’s costume. Made of 1 mm thick mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

HISTORY

• Historically designed with sculpted ridges and overlapping plates to provide reinforced protection and to deflect attacks on a chaotic battlefield
• Plate armour became more popular as firearm technology became more prevalent during the 13th century

Your squire buckles the straps of your custom-fit Gothic Half Armour, adjusting it to be comfortable and snug over your gambeson. You paid top coin for this suit of plate, and you expect people will be impressed when they see how it shines on the battlefield.

Your blacksmith assured you that the Gothic Half Armour design was the latest in technology, able to withstand and deflect attacks--even arrows from the enemy’s bows. You are a mighty warrior, indeed, to be the owner of such fine craftsmanship. A fitting symbol of your godly-given status.

DETAILS

This bestselling armour is made for the upper crust of the battlefield, featuring front and backplates, faulds and tassets. The breast plate has a central crease and ridges around the rim. The armour is a close fit to the arms and throat to minimize the number of weak spots. The matching breast and backplates extend below the abdomen, connecting to the tassets beneath the protection of the faulds: a series of overlapping, modelled metal plates protecting the weak spots at the pelvis.

Made from mild steel with rolled edges and top-grain leather straps and fittings, this Gothic Half Armour is built to withstand the abuse of a LARP or reenactment while keeping the user safe and comfortable. With regular leather and metal armour care, you can expect this armour set to last for a long time!

HISTORY

• Gothic style historically developed in the 1420-1440s thanks to technological advances
• Characterized by the curves, flutes and ridges, which strengthened the armour and deflected projectiles

The breastplate from the "Elias" series is kept simple and functional. The chest and back plate are connected by flexible leather pieces on the shoulders. This not only increases the mobility, it also allows a quick fitting and displacement of the armor. Of course, this armor also has suspensions for spaulders. It is closed with straps on the sides by which the size can also be adjusted. Thanks to its plain and simple straightness, the short breastplate "Elias" is very suitable for  guards, soldiers or mercenaries. It is also a good base to build a heavy armor on it.

One size only, best fits a size S-M

The toll of looking this darn good is that people stare at you everywhere you go. Striding down the street on your beautiful, but sturdy mare, the townsfolk eye you as one might a king--or at the very least, a very rich lord.

Can you blame them? You are decorated in your Corrazina, a piece of armour so regal you might as well be royalty. Let them look in awe! Just don’t let them get their peasant hands all over the fine suede.

DETAILS

Epic Armoury’s Green Corrazina is a beautiful low-fantasy piece of armour protecting the front and back of the torso and abdomen. The plate rests at the waist and is sculpted to fit the body and add structural strength to the steel. This steel riveted piece has been covered with a luxurious and soft layer of green suede leather, giving it a particularly rich appearance.

The Corrazina is constructed using multiple metal plates in order to bend comfortably around the body, and is further adjusted to fit your torso using top-grain leather straps at the shoulders, sides, and along the front. It is fully usable with Epic Armoury’s other metal work products, giving you the freedom to customize your character’s costume. Made of 1 mm thick galvanized mild steel, suede leather, and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

HISTORY

• Corrazina armour was a style of armour where metal plates were fastened to leather or fabric
• Sometimes referred to as the Brigantine style

Combined with the Undead plate belt & torso Mytholon revives some history.
Originally developed as part of the NPC deal for Conquest of Mythodea 2007, the set is being resurrected 15 years on. Whether it's undead flesh or a dark knight, Mytholon's Undead series cuts a fine figure in life or in death.

The "Untot" torso is closed on the sides with stable roller buckles. It is elaborately decorated with beads and features a riveted cross in the middle, which, like the separately available leg pockets, is ideal for attaching a coat of arms, a skull or other ornaments.