Rodent Mask

The next time someone calls you a rat faced bastard, allow them to not speak in a hyperbolic manner.

The Lead Pipe - Large Has been Discontinued 

Right! Let's bash some noggins!

The undead have found your hiding hole, and you are nearly cornered by an endless sea of flesh-hungry abominations. You’re barely able to escape, but not without losing your gun. You’re practically defenseless.

You happen upon a junkyard. It’s an area that gives you the creeps, but you’re desperate to find a new weapon. That’s when you spot the Lead Pipe sticking out of a pile of refuse. You pull the metal free, giving it a few test swings. It will suit your needs for now.

DETAILS

Dark Moon’s Lead Pipe may lack some sophistication, but it makes up for it with plenty of weight and impact. This 52 cm long latex pipe is handpainted to look like tarnished metal. A sculpted tread at both ends of the straight bar serves as a grip and an attachment to a 5 cm long bend. Though not hollow all the way through, the lead pipe is hollow at the ends to add to its realistic appearance.

Plumbers looking for piping material are advised that this item may be better for slaying zombies in the post-apocalypse than running water to a sink. Made from durable closed cell foam around a solid fibreglass core and finished with a strong latex coating, you can feel confident that this LARP weapon will provide the safety and appeal you want when crafting your post-apocalyptic kit.

INSPIRATION

• An example of a weapon you might find after the world-as-we-know-it ends
• Used as protection when you’ve inevitably run out of bullets for your gun

Single layer cape in 100% cotton twill.A very good first-purchase.This cape is made in “action-length”, which means you can run and fight in it. The front ends just over the knees, and at center back it comes halfway down the calves.Maintenance:Mashine wash on 40°C. Wash seperately the first time, hereafter with similar colours.

As DJ Tiesto may have once or twice said with Sevenn: "Boom"

BOMB’S AWAY!

Epic Armoury’s Hand Bomb is a very realistic looking mockup of a 17th Century cast iron gunpowder based grenade. Appealing with its slightly cartoonish appearance it can be used as a throwing weapon whether you are LARPing aboard a pirate ship or rogueing in the forest. The 7 cm. wide bomb is available in black and is sculpted and hand painted to look like cast iron; furthermore, it sports a faux cotton fuse that has been dipped in black latex to avoid splitting strands. Its small size diameter fits great in the hand and makes it easy to throw. Made from coreless durable closed cell foam and finished with a strong latex coating, you can feel confident that this Hand Bomb will provide the safety and appeal you want when crafting your LARP kit.

Please note: Do NOT light the fuse on fire! It will possibly damage the product and the warranty will not cover.

Re-usable soft natural latex Werewolf Jaw. Apply with spirit gum or mastic (not included) Jaw only! Nose sold separately.

The prosthetic is slip cast latex. It is of uniform thickness. Only the edge is glued where it sits flat to the skin. This edge is not feathered but it can be concealed using latex or a combination of latex and thickener. Normal spirit gum is suitable to apply the prosthetic, and any water-based face paint, or even alcohol based can be used to paint it. If the prosthetic is to be used under hot stage lighting or in conditions where a grease paint is preferred, use oil based cream make up after the latex has been coated with caster sealer, alternatively use rubber mask grease paint which is specially formulated with extra oil added to it. It is much easier to pre-paint the prosthetic prior to fitting. The prosthetic can be re-used multiple times. It may be necessary to trim the edge to fit. It can be cleaned with gum removers and/or soap and warm water.

Morbin Masks Studios is a prosthetics manufacturer in the United Kingdom. 

Operating since 1984, Morbid Masks produces a wide range of light-weight latex ears, noses, facial features and masks.

Re-usable  soft natural latex Werewolf Nose. Apply with spirit gum or mastic (not included).

The prosthetic is slip cast latex. It is of uniform thickness. Only the edge is glued where it sits flat to the skin. This edge is not feathered but it can be concealed using latex or a combination of latex and thickener. Normal spirit gum is suitable to apply the prosthetic, and any water-based face paint, or even alcohol based can be used to paint it. If the prosthetic is to be used under hot stage lighting or in conditions where a grease paint is preferred, use oil based cream make up after the latex has been coated with caster sealer, alternatively use rubber mask grease paint which is specially formulated with extra oil added to it. It is much easier to pre-paint the prosthetic prior to fitting. The prosthetic can be re-used multiple times. It may be necessary to trim the edge to fit. It can be cleaned with gum removers and/or soap and warm water.

Morbin Masks Studios is a prosthetics manufacturer in the United Kingdom. 

Operating since 1984, Morbid Masks produces a wide range of light-weight latex ears, noses, facial features and masks.

Ears that sit on your actual ears!

Instead of, you know, at the top of your head, leaving your regular ears sitting there and making you look like you suffer from the worst Doppler Effects ever.

Latex Feline, Avatar, Cat ear prosthetics. Soft, thin and comfortable.

Fantasy ears for dressing up, fancy-dress, stage and theatre, Cosplay, fantasy role play, LARP/LRP.

Full ear covers. Just glue in place with spirit gum or theatrical/stage glue. These ear prosthetics can be painted with water or alcohol based make-up and reused many times. After each use just remove any glue residue, wash away any makeup and dirt in warm soapy water, dry, and store in a plastic bag in a cool dark place.

Spirit gum/mastic not included, please order separately.

Morbin Masks Studios is a prosthetics manufacturer in the United Kingdom. 

Operating since 1984, Morbid Masks produces a wide range of light-weight latex ears, noses, facial features and masks.

Whether you're wanting to cosplay as a Bakeneko, cat girl, or girl from Cats, this prosthetic will suit your needs. Also a good complement for those wanting to Avatar it up a little.

Re-usable Cat nose and brow one piece unpainted latex facial appliance. Apply to the skin with Spirit Gum/Mastic (not included).

The prosthetic is slip cast latex. It is of uniform thickness. Only the edge is glued where it sits flat to the skin. This edge is not feathered but it can be concealed using latex or a combination of latex and thickener or theatrical Wax. Normal spirit gum is suitable to apply the prosthetic, and any water-based face paint, or even alcohol based can be used to paint it. If the prosthetic is to be used under hot stage lighting or in conditions where a grease paint is preferred, use oil based cream make up after the latex has been coated with caster sealer, alternatively use rubber mask grease paint which is specially formulated with extra oil added to it. It is much easier to pre-paint the prosthetic prior to fitting. The prosthetic can be re-used multiple times. It may be necessary to trim the edge to fit. It can be cleaned with gum removers and/or soap and warm water.

Morbin Masks Studios is a prosthetics manufacturer in the United Kingdom. 

Operating since 1984, Morbid Masks produces a wide range of light-weight latex ears, noses, facial features and masks.

Re-usable. unpainted soft latex rubber prosthetic Feline/Cat Nose. Apply with Spirit Gum/Mastic (not included).

Morbin Masks Studios is a prosthetics manufacturer in the United Kingdom. 

Operating since 1984, Morbid Masks produces a wide range of light-weight latex ears, noses, facial features and masks.