Barbarian Greaves

You fear punishment and beg for your lives, so I will set you free!

The polyurethane Barbarian Greaves from Epic Armoury is a unique way to shield your shins at your next Larp event. This pair of foam leg armor covers your lower legs and knees as you wage war! Made from lightweight polyurethane foam, these barbaric greaves have a simulated dark brown leather hide pattern embellished with an animal skull knee cap and a metal shin plate. Two leather straps with metal buckles help secure this flexible fantasy armor to your legs so you may run into combat as quickly as possible. Polyurethane armor requires no maintenance other than the occasional oiling of the leather straps

The sword sits in the baldric hanging down from your shoulder, faithful to its master despite the challenges. It has been a long and dusty road--and your uniform down to your Medieval Pants is covered in dirt and grime--but that sword has remained at your side through it all.

As your infantry unit comes to a halt, there is the tension one always feels before the fight. You resist the anxiety, because the moment you step into battle all of that must fade away. It will be you fighting alongside your fellow soldiers, and it will be the sword hanging in your trusted baldric that keeps you alive.

DETAILS

Epic Armoury’s Pants Medieval is a classic pair of pants with signature baggy legs featuring a few convenient modern alterations, such as the sizeable pockets. Made from durable light canvas, these pants are extra wide above the knees before mimicking leggings, easily fitting inside your boots and leg armour. Adjust the fabric around the calves by tightening the reinforced cotton cord to get the best fit.

The pants are fitted with a cotton drawstring at the waist to keep the pants in place while leaving sufficient room for a proper belt. The Pants Medieval are fully compatible with other Epic Armoury clothes and armours, allowing you the freedom to personalize your character's gear.

HISTORY

• Commonly referred to as trousers, pants have been worn in the Western world since ancient times
• A great way to show off wealth with the excess use of fabric
• Design is similar to the Pluderhose, a 15th century design that fastened at the knee

You are darkness, you are the night. You are the shadow that slides across the land, making men clutch their swords tighter when the sun has faded.

You are also a practical person. The night’s cold breeze is a familiar aspect of your dark work, but you like your warmth and protection. And for that, these Gambeson Legs are perfect beneath your greaves.

DETAILS

Epic Armoury’s Gambeson Legs are a set of quilted cotton greaves designed to add comfort and protection beneath your leg armour. Made from quilted cotton canvas lined with a soft polyester interior and a medium cotton outer layer, they can be worn on their own or as padding beneath heavy steel or leather armour.

The Gambeson Legs are stitched to ensure the padding will remain evenly spaced. Secure them to your legs by tightening the cotton string lacing through brass eyelets up the calf. Quilted armours were common through many cultures and used across a broad expanse of time. With their neutral style, the Gambeson Legs will work on a wide variety of characters.

HISTORY

• Used as padding under chainmail or plate armour
• Historically, a high-medieval European gambeson was recorded as being capable of stopping sword blows from penetrating the skin
• Could stop heavy arrows and mace and axe impacts with the addition of overlaying chainmail

THE WORLD IS AT YOUR FEET

Epic Armoury’s Galahad Shoes are probably the most versatile medieval shoes in our selection. They are ideal for a townsperson, a soldier, a scrappy adventurer, or even a roughed-up orc. Made from tough, yet supple brown synthetic coloured leather and a rubber outsole, this shoe is handmade and durable while still offering comfortable support around the ankle. Easily slide these shoes onto your feet, adjusting the fit by lacing the leather drawstrings on both sides tight below the ankles.

Epic Armoury’s Shoes Galahad are designed with a pointed toe and contrasting, resilient stitching. They are a perfect addition to your fantasy or historical reenactment costume and will last a long time with proper care and maintenance. Epic Armoury’s footwear is measured in European sizes.

N.B.: Pre-order required

This shoe size calculator link may also be useful in determining your size. It isn't brand-specific, but allows you to convert between international sizing charts. All shoes we sell use European sizing (e.g. size range 36-47). 

https://goodcalculators.com/shoe-size-converter/

They are barbarians, and they think that the customs of their tribe are the laws of nature.

The awesome Barbarian Cuirasse from Epic Armoury is a polyurethane armor comprised of a breastplate and backplate designed to provide comfort and protection in Larp combat. This durable fantasy armour is made to resemble a dark brown leather hide equipped with steel plates. The round steel gut plate bears the skull from a dead creature, probably from some sort of ritual sacrifice to appeal to Odin. This flexible medieval body armour has a series of straps over the shoulders and on its side for a quick and adjusted fit. This light Larp armor requires no maintenance and is made to endure harsh combat situations needed to be part of the hoard.

We might be the most savage and brutal. Still, we are free!

The polyurethane Barbarian Helmet from Epic Armoury is a conical-shaped helmet that is both simple and useful in combat. This Norman-inspired foam helmet is textured to look like a dark brown leather helm and reinforced by steel bands. The Barbarian helmet comes with cheek guards and a chin strap for a protected and secure fit. This fantasy-inspired helmet is a lightweight alternative for Larpers or cosplayers requiring to wear them for extended periods. It is recommended that you wear a padded arming cap for comfort beneath this impressive PU helmet.

You can take the barbarian out of the tavern, but he can take the blood out of your body.

The polyurethane Barbarian Pauldrons from Epic Armoury provides maximum maneuverability to the pitiless warrior. This pair of maintenance-free foam shoulder protection is made to resemble thick brown leather, but each shoulder possesses its own distinctive style and character. The first shoulder armor seems to be made from two separate pieces and exhibits the skull from a sacrificial animal. The second has a single strip of plate metal used to deflect sword blows from Larp weapons. This fantasy armor is the perfect alternative for role players and cosplayers who seek lighter armor. They can be worn over long periods at fairs and can endure hard battles.

Let's show the gutless pigs how the warriors of Varrock can fight!

The set polyurethane Barbarian Vambraces from Epic Armoury provides excellent armor protection to the wrists and forearms. This pair of bracers is made to look like thick brown leather and have steel diamond-shaped accents. They are light and comfortable to wear during long Larp adventuring campaigns or at Comicons. These foam bracers are more lightweight than steel or leather and require no maintenance. You can secure them onto your arms using the adjustable leather straps and bend to fit your arms' shape. Oh, and did we mention that they and are quite comfortable to wear in warm weather?

“I think I see them!” one of the younger boys shouts his voice full of excitement and impatience. You stand at the shoreline, seagulls screeching, one hand on your protruding belly and the other shielding your face against the sharp light of the sun, watching while the red and white sails draw closer with the promise of exciting new tales and exotic wares.The longing has been tormenting

And finally you see him. Your stalwart, proud, magnificent man standing at the bow, one strong arm lifted in a greeting. His armour caught by a ray of sun glistening in the bright midday

DETAILS

Very few things offer greater protective qualities than steel, when it comes to historical armour. But with steel also comes disadvantages like weight, inflexibility and the need for constant maintenance to protect against rust. Nevertheless, in this day and age, unless you are on the re-enactment or SCA battlefield, you simply don’t need the level of protection that steel affords.

We here at Epic Armoury would like to present our Light Kit Edition Armours. Light Kit Armours are armours made out of Polyurethane, meant to resemble authentic metallic armours. Created with weight, comfort and utility in mind, Light Kit edition armours are for those people, who want to look like they are wearing authentic metallic armours while being comfortable.

To the untrained eye, these polyurethane armours are difficult to distinguish from their metallic counterparts.They are, however, more comfortable to wear and can be worn for long periods of time without discomfort. Indeed, the flexible nature of this armour means that it can bend to the contours of your body in a way that rigid steel will not. Each part is a quarter of the weight of their steel equivalent, allowing for faster movement with less fatigue. Each piece is hand painted with a durable acrylic finish and is detailed to look as realistic as possible. The maintenance free finish will not rust like steel, and can be worn in all kinds of weather. Adjustable leather straps and the flexible nature of the armour allows it to be comfortably worn. These Nordic Light Kit Greaves are inspired by Viking armour and features beautiful Celtic-inspired ornamenting.

This armour is perfect for a variety of uses such as LARP, Cosplay, Costume Parties or Theatre.

Polyurethane armour is a new project collaboration between Epic Armoury and The Knight Shop International designing under the brand names "Red Dragon Armoury" and "Light Kit".

You have travelled a long way to get here, and even though this battle does not hold any greater personal cause for you, the payment more than makes up for your lack of conviction.

“It does not pay to have principles.” Casual pocket philosophy delivered to you by an over-the-hill mercenary, with drunken certainty many miles up the road on the journey, that led you to this livelode. As it turns out, it has become a rule of life for you.

You decide to camp for the night and after tending to your horse, you take off your armour and carefully place it beside your impromptu bed. You will be wearing it at the following day’s engagement and it will protect you just as always ...

DETAILS

Very few things offer greater protective qualities than steel, when it comes to historical armour. But with steel also comes disadvantages like weight, inflexibility and the need for constant maintenance to protect against rust. Nevertheless, in this day and age, unless you are on the re-enactment or SCA battlefield, you simply don’t need the level of protection that steel affords.

We here at Epic Armoury would like to present our Light Kit Edition Armours. Light Kit Armours are armours made out of Polyurethane, meant to resemble authentic metallic armours. Created with weight, comfort and utility in mind, Light Kit edition armours are for those people, who want to look like they are wearing authentic metallic armours while being comfortable.
To the untrained eye, these polyurethane armours are difficult to distinguish from their metallic counterparts.They are, however, more comfortable to wear and can be worn for long periods of time without discomfort. Indeed, the flexible nature of this armour means that it can bend to the contours of your body in a way that rigid steel will not. Each part is typically a quarter of the weight of their steel equivalent, allowing for faster movement with less fatigue. Each piece is hand painted with a durable acrylic finish and is detailed to look as realistic as possible. The maintenance free finish will not rust like steel does and can be worn in all kinds of weather. Adjustable leather straps and the flexible nature of the armour allows it to be comfortably worn. This Mercenary Light Kit Cuirass is inspired by Medieval mercenaries and era typical armour.

This armour is perfect for a variety of uses such as LARP, Cosplay, Costume Parties or Theatre.

Polyurethane armour is a new project collaboration between Epic Armoury and The Knight Shop International designing under the brand names "Red Dragon Armoury" and "Light Kit".

The massive heat feels like a cyclopean wave shrouding and suffocating every soldier standing on the arid ground outside the city of Etakia. “Stand your ground! Hold the formation!” your captain screams. You notice how the fellow standing close to your left is clenching his spear as one single drop of sweat trickles down your nose and vanishes into the dusty swarm of feet. In a flash of a second the enemy will slam against the front shields, and you and your fellow soldiers will do as you have been trained to. Moving forward slowly as one entity, as a living machine. Sweating and panting. Pushing. Bashing. Killing.

DETAILS

Very few things offer greater protective qualities than steel, when it comes to historical armour. But with steel also comes disadvantages like weight, inflexibility and the need for constant maintenance to protect against rust. Nevertheless, in this day and age, unless you are on the re-enactment or SCA battlefield, you simply don’t need the level of protection that steel affords.
We here at Epic Armoury would like to present our Light Kit Edition Armours. Light Kit Armours are armours made out of Polyurethane, meant to resemble authentic metallic armours. Created with weight, comfort and utility in mind, Light Kit edition armours are for those people, who want to look like they are wearing authentic metallic armours while being comfortable.
To the untrained eye, these polyurethane armours are difficult to distinguish from their metallic counterparts.They are, however, more comfortable to wear and can be worn for long periods of time without discomfort. Indeed, the flexible nature of this armour means that it can bend to the contours of your body in a way that rigid steel will not. Each part is typically a quarter of the weight of their steel equivalent, allowing for faster movement with less fatigue. Each piece is hand painted with a durable acrylic finish and is detailed to look as realistic as possible. The maintenance free finish will not rust like steel does and can be worn in all kinds of weather. Adjustable leather straps and the flexible nature of the armour allows it to be comfortably worn.The Spartan Light Kit Musculata is inspired by Ancient Greek body idealized armour and Hoplite soldiers.

This armour is perfect for a variety of uses such as LARP, Cosplay, Costume Parties or Theatre.

Polyurethane armour is a new project collaboration between Epic Armoury and The Knight Shop International designing under the brand names "Red Dragon Armoury" and "Light Kit".

Rumours are heard whispered in the hallways of the castle and the straits of the Citadel about a usurper. The crafty lady-in-waiting, that you slept with last night, seemed more exhilarated gossiping about how unknown forces within the court are plotting against the old king and his only son. “Who would possibly want that sad excuse of an heir anywhere near the throne, once the old man is dead”, she had tattled with unabashed excitement.

Gossip is not a part of your duties though. Your paramount task is protecting the life of your king at all times; always alert and armed. You would gladly give your life for this man who has been appointed to rule by the Gods. Just as you put on your helmet you hear loud, agitated voices outside in the courtyard...

DETAILS

Very few things offer greater protective qualities than steel, when it comes to historical armour. But with steel also comes disadvantages like weight, inflexibility and the need for constant maintenance to protect against rust. Nevertheless, in this day and age, unless you are on the re-enactment or SCA battlefield, you simply don’t need the level of protection that steel affords.

We here at Epic Armoury would like to present our Light Kit Edition Armours. Light Kit Armours are armours made out of Polyurethane, meant to resemble authentic metallic armours. Created with weight, comfort and utility in mind, Light Kit edition armours are for those people, who want to look like they are wearing authentic metallic armours while being comfortable.

To the untrained eye, these polyurethane armours are difficult to distinguish from their metallic counterparts.They are, however, more comfortable to wear and can be worn for long periods of time without discomfort. Indeed, the flexible nature of this armour means that it can bend to the contours of your body in a way that rigid steel will not. Each part is typically a quarter of the weight of their steel equivalent, allowing for faster movement with less fatigue. Each piece is hand painted with a durable acrylic finish and is detailed to look as realistic as possible. The maintenance free finish will not rust like steel does and can be worn in all kinds of weather. Adjustable leather straps and the flexible nature of the armour allows it to be comfortably worn. The Knightly Light Kit Helmet is inspired by Medieval armour and valiant knights

This armour is perfect for a variety of uses such as LARP, Cosplay, Costume Parties or Theatre.

Polyurethane armour is a new project collaboration between Epic Armoury and The Knight Shop International designing under the brand names "Red Dragon Armoury" and "Light Kit".

Ride on riders of the North, ride on to battle, ride on to glory

The polyurethane foam Outrider Greaves from Epic Armoury is all about combat efficiency. This set of greaves is painted to look like real steel and is accentuated by black leather plates. These fantasy greaves are designed to provide armor protection to the lower legs. Our lightweight Larp greaves possess knee guards and are equipped with thick leather straps for a quick, easy fit. Rogues will appreciate them for their weight and flexibility, and fighters will recognize them for their protection and durability in harsh combat. Polyurethane armor will not rot or rust and will increase your character's stamina in battle.

Vest in yourself the Code of your King and you will find salvation!

Whether you need to defend a kingdom or take on a simple quest, the Palace Guard Greaves from Epic Armoury is an excellent choice. To begin with, these polyurethane greaves grant the fighter amazing agility and protection in combat. The shin guards are lightweight, require no maintenance and are perfect in any weather condition. Much lighter than steel armour, these fantasy greaves match the curvature of your legs and will protect the soldier's tibia and knees from harm. Each pair of greaves comes in a silver finish typical for any Paladin or honourable knight.