Morion Helmet

The Morion helmet sits comfortably on your head as you march, faithful to its master despite the challenges. It has been a long and dusty road, but that helmet has remained with you through it all.

As your infantry unit comes to a halt, there is the tension one always feels before the fight. You resist the anxiety, because the moment you step into battle all of that must fade away. It will be you fighting alongside your fellow soldiers, and it will be your trustworthy armour that keeps you alive.

DETAILS

Epic Armoury’s Morion is a steel helmet inspired by the 15th- to 16th-century Spanish conquistadors conquering the world for Gold, God and Glory. The Morion’s brim is shaped to protect the head and face without obstructing vision, curved along the front and back. The skull-cap is reinforced with a long comb running from the forehead along the helmet’s apex. Riveted cheek guards are fitted to the helmet, adding additional protection to the face.

Secure the Morion by tightening the leather strap beneath the chin, keeping the helmet in place. Made of 1 mm thick mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

• Made from 18 guage mild steel
• Internal circumference Medium 59cm, Large 62cm
• To maintain armour, ensure any water/moisture is removed after use and regularly apply Lanolin based lubricant for best results, this will help prevent rust.
  

HISTORY

• Used from the middle 16th to early 17th centuries
• Crest, or “comb,” along the top was designed to strengthen the helmet
• Later versions added the cheek guards to protect soldiers from sword cuts
• Evolved from the kettle hat

Silence. Perfect silence.

You use the silence as a cloak of armour, masked in the darkness with the help of your Mempo, waiting for the perfect opportunity. You ready your throwing knives, ready to launch your deadly attack when the lord finally emerges from inside the keep. One quick flick of your wrist and the lord breathes his last, you knife hitting its mark...and you vanish, leaving their guards bewildered and afraid.

DETAILS

Epic Armoury’s Mempo is a leather half-mask inspired by early Asian soldiers. This mask protects the face from the bridge of the nose to the chin. Four ventilation slits allow proper airflow through the mask’s mouth, designed to be comfortably worn for long periods of time. Secure the mask to your face by tying two long cotton-weave cords around the head.

Made from 3mm thick vegetable-tanned full-grain leather, Epic Armoury’s Mempo is designed to add a great layer to your fantasy or historic costume. With the best quality materials, this mask is built to withstand extensive abuse with regular leather care.

HISTORY

• Worn by Japanese and Chinese infantry and cavalry from as early as 200 BC
• Used to balance and secure top-heavy helmets, often decorated to give the wearer an extra fierce look

You look upon your leading officer as he makes his way down the line of your fellow soldiers. Your fate and the fate of your entire unit is dependent on this veteran’s word, and you find yourself relieved not to shoulder such a heavy burden.

“We must fight!” your officer shouts for all to hear. You adjust your Shoulder Plate Giant Warrior armour, double checking the buckles as you listen to him continue. “For our homes and for our families, we will fight until we can fight no more!” With a resounding cheer, your fellow soldiers ready themselves for the charge. You withdraw your weapon, eager and afraid all at once.

The battle has begun.

DETAILS

Epic Armoury’s Shoulder Plate Giant Warrior are a set of two shoulder guards designed to protect the shoulder-joints and upper arm. This armour’s metal plates overlap one another to provide complete laminate protection. Overlaying the spaulders is a large pauldron, which provides additional protection to joints and armpits. Atop the pauldron a vertical plate sword breaker catches and deflects blows before they can impact the head. The sword breaker is slightly concave and somewhat higher at the back than the front, thus providing protection without impairing vision. Although the armour is designed to match Epic Armoury’s ‘Warrior’ set, it is fully interchangeable with other Epic Armoury armours in order to fully customize your character’s look.

Secure the Shoulder Plate Giant Warrior by tightening the top leather strap onto a breast- or neck-plate, adjusting so that the armour sits comfortably over the shoulder. Keep the armour from further moving by securing an additional top leather strap around the upper arm. Made of 1 mm thick mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

HISTORY

• Historically designed with sculpted ridges and overlapping plates to provide reinforced protection and to deflect attacks on a chaotic battlefield
• Plate armour became more popular as firearm technology became more prevalent during the 13th century

Intimidation. It’s your main form of weaponry while facing the heroes, because it gives you full control. When your enemies fear you, they are more likely to make fatal mistakes.

Your Dark Drake Armour is as dark as your intentions, hardened by the evil magic your subjects provide. As you withdraw your sword, sizing up the quivering soldier who feels brave enough to stand against you, you begin to laugh. This will be a very brief fight--if you can even call it that. The little man looks barely strong enough to hold up his hammer.

DETAILS

Epic Armoury’s Dark Drake Breastplate is a finely sculpted piece of armour that protects the front of the torso, chest and abdomen. Sculpted to fit the body and add structural strength to the steel, this galvanized steel piece has been decorated to mimic reptilian scales. The plate rests at the hips and has a V-shaped flange--or sword turner--that deflects blows from the weak spot where torso and leg armour fit together. The armour is made from rolled mild steel treated with Epic Armoury’s Epic Dark Metal coat, which gives the armour a rugged, antique finish.

The Dark Drake Breastplate is designed to match Epic Armoury’s Dark Drake Armour, but is fully usable with other Epic Armoury metal products, giving you the freedom to customize your character’s costume. Made of 1 mm thick galvanized mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care. 

HISTORY

• Plate armour became more popular as firearm technology became more prevalent during the 13th century
• Historically designed with sculpted ridges to provide reinforced protection and to deflect attacks on a chaotic battlefield

Intimidation. It’s your main form of weaponry while facing the heroes, because it gives you full control. When your enemies fear you, they are more likely to make fatal mistakes.

Your Dark Drake Armour is as dark as your intentions, hardened by the evil magic your subjects provide. As you withdraw your sword, sizing up the quivering soldier who feels brave enough to stand against you, you begin to laugh. This will be a very brief fight--if you can even call it that. The little man looks barely strong enough to hold up his hammer.

DETAILS

Epic Armoury’s Dark Drake Breastplate is a finely sculpted piece of armour that protects the front of the torso, chest and abdomen. Sculpted to fit the body and add structural strength to the steel, this galvanized steel piece has been decorated to mimic reptilian scales. The plate rests at the hips and has a V-shaped flange--or sword turner--that deflects blows from the weak spot where torso and leg armour fit together. The armour is made from rolled mild steel treated with Epic Armoury’s Epic Dark Metal coat, which gives the armour a rugged, antique finish.

The Dark Drake Breastplate is designed to match Epic Armoury’s Dark Drake Armour, but is fully usable with other Epic Armoury metal products, giving you the freedom to customize your character’s costume. Made of 1 mm thick galvanized mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

HISTORY

• Plate armour became more popular as firearm technology became more prevalent during the 13th century
• Historically designed with sculpted ridges to provide reinforced protection and to deflect attacks on a chaotic battlefield