Shadow Tassets - Suede

I am no longer amazed by how quickly a man will justify his change of heart when a spear is levelled his way.

This stunning set of hard, black leather Shadow Armor Tassets is what Stygian warriors need as they head out into the night. This leg armour is made from a series of segmented full-grained leather plates designed in true drow fashion. This armor is made to protect your upper legs and thighs in combat and bring your unique Larp character to life. Each tasset possesses two buckled straps that allow you to easily fasten it to your shadow armor or waist belt. Adjust the leather tassets to fit your form, thus granting you a full range of movement in combat or when sneaking around in the darkness.

Note: The shadow blade is a black blade and handle. In some photos it may appear lighter.

Some consider you crazed. Perhaps you are not in your right mind, but then--who cares? No one dares to insult you to your face. You are too powerful. Too frightening.

With your Dark Elven Shadow Blade, you are a deadly and respected figure in the underground community. When you pass by, all pause and hold their breath.

DETAILS

Epic Armoury’s Dark Elven Shadow Blade is a latex-hybrid chopping long sword for the cruel Dark Elf or roguish villain. The sword is 100 cm long from tip to pommel, with a curved single-edged blade. The detailed crossguard features gold accents and a sculpted grip, allowing optimal maneuverability and comfort for the hand. The handle is cast and painted to look like a blackened bone, while the elegant and deadly blade is painted a metallic black.

With a dark, dangerous appearance, this Dark Elven Shadow Blade is our highest quality gear due to its impressive durability and detail. The blade is made from closed cell foam around a fibreglass core and finished with a strong latex coating, while the handle is a polyurethane foam cast that allows for greater detail and no maintenance. This hybrid model sword will make you confident in the safety and appeal of your weapon on the battlefield.

INSPIRATION

• Inspired by the Shamshir or Scimitar weapons of the middle east
• Dark elves were first mentioned in Norse mythology as the “Dökkálfar” or “Svartálfar” written in the Prose Edda in the 13th century
• Have also been referred to as “Drow” in the Dungeons & Dragons universe, made famous by R.A. Salvatore’s The Dark Elf Trilogy

Only the finest of Drow assassins were given the right to wear the killing claws. 

Only they could get close enough to make them of any real use.

Deal as Much as You Receive

Epic Armoury’s Black/Desert Beige Claw Bracer is a leather gauntlet designed to protect the lower arm with a good measure of old-fashioned and brutally offensive spikes. Constructed of overlapping plates connected by leather ties, move freely while still benefiting from complete coverage from the back of the hand to the elbow. Of course, this armour is not without style! Flexible leather ‘claws’ adorn the back of the hand like claws, while each leather plate has its own unique and spiked flair. A desert beige plate at the elbows also features runic drawings--perhaps infused with the powers of necromancy.

The Claw Bracer is made from full-grain leather that has been vegetable tanned. Attach the Claw Bracer to your right arm using the leather straps around the elbow, forearm and wrist. A soft leather strap is also tightened around the hand, with a loop fitted around the middle finger. Fearsome to behold and designed to appear sharp and deadly, use this armour with an assortment of secretive and dangerous characters. It can be worn with Epic Armoury’s matching Dark Elf armours or on its own.

Please note that this gauntlet is designed for right-hand use.

Dark Hand Protection

• Hand protection is one of the oldest forms of armour, due to its importance in combat
• This particular style might also be referred to as a “demi-gauntlet,” due to its limited finger protection

Only the finest of Drow assassins were given the right to wear the killing claws. 

Only they could get close enough to make them of any real use.

Deal as Much as You Receive

Epic Armoury’s Black/Desert Beige Claw Bracer is a leather gauntlet designed to protect the lower arm with a good measure of old-fashioned and brutally offensive spikes. Constructed of overlapping plates connected by leather ties, move freely while still benefiting from complete coverage from the back of the hand to the elbow. Of course, this armour is not without style! Flexible leather ‘claws’ adorn the back of the hand like claws, while each leather plate has its own unique and spiked flair. A desert beige plate at the elbows also features runic drawings--perhaps infused with the powers of necromancy.

The Claw Bracer is made from full-grain leather that has been vegetable tanned. Attach the Claw Bracer to your left arm using the leather straps around the elbow, forearm and wrist. A soft leather strap is also tightened around the hand, with a loop fitted around the middle finger. Fearsome to behold and designed to appear sharp and deadly, use this armour with an assortment of secretive and dangerous characters. It can be worn with Epic Armoury’s matching Dark Elf armours or on its own.

Please note that this gauntlet is designed for left-hand use.

Dark Hand Protection

• Hand protection is one of the oldest forms of armour, due to its importance in combat
• This particular style might also be referred to as a “demi-gauntlet,” due to its limited finger protection

Damn you to Lolth, don't you dare pretend my life matters to you!

The black suede Shadow Torso Armour from Epic Armoury will make a real difference in battle. This thick leather cuirass is inspired by drow culture and is designed to incite fear. This fantasy armor has sharp, clean edges and solid stitching, giving your rivals advanced knowledge that you will fight fair or honourably. The matte black finish of your armour allows you to quickly disappear in the shadows, and the soft texture produces next to no noise as you stalk your prey. A series of buckles and straps enable the assassin to conveniently and quickly adjust the black leather armor to a snug fit.

Winning is gained through treachery and invites treachery against those who gain it!

The Shadow Armor Gorget & Pauldron Set is for those who spend their days defending against the daggers that would find their backs. This armor set comprises two hard suede pauldrons and a suede gorget, ideal for fantasy-based Larpers who crave battle. The jagged-edged pauldrons look similar to dragon scales and had adjustable shoulder pads that can stretch to fit most elite warriors. To put on the shoulder armor, simply slip your head through the gorget, and you are ready for combat. You can also attach the pauldron set to your plate armor or cuirass for a dramatic effect!

Mytholon Belt Shields are sold as singles, excluding belt.

Mytholon belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group. Made from 1,2 mm steel, we offer them in our favorite plate armour series now. Matching the "Markward" series, this shield is decorated with the typical cut edges on the top. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece.

The belt shields, just like arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place.

Talking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a paper of 600 grid. Use some automobile colour primer as the colour-matching foundation. When the foundation is fully dried, you should sand it again and apply a second layer of colour. Now is the time, where you can paint your details, like heraldry, animals or writings with weatherproof acrylic paint.

Mytholon Belt Shields are sold as singles, excluding belt.

This small belt shield completes the "Galahad" torso armour.
Use the two buckles to strap it to the centre part of the chest plate and to cover up the unprotected parts in your crotch.
It may be a small armour piece, but it brings a huge effect to any armour, as it can be used to paint heraldic colours on it.
This shield can also be added to any exsisting armour, but may need some handiwork to get it attached.

There is a price to pay for armour. Armour protects your precious body - your one and only - but it has great weight and great material cost. No normal person can afford the blacksmith when desiring a suit of full plate. Thankfully, while your pocket is not deep, your skills are many.

You wear your minimal Soldier Belt Shields when you fight, because it doesn’t weigh you down. You are faster than your opponents...but also not so dumb as to go into a fight completely unprotected.

DETAILS

Epic Armoury’s Soldier Belt Shields are two plates designed to protect the thighs. These rolled edge steel plates hang from your own belt to cover the outer thighs, sliding into place using brown leather loops securely fastened with rivets. Each plate is 25cm long and 21cm wide, with two 24cm folded leather loops.

The Soldier Belt Shields armour features a curved edge and overlapping welded plates, influenced by the look of classic tassets that can be paired with a multitude of styles. This armour does not require assistance to equip, because it is very easy to put on and take off. Made of 1 mm thick galvanized mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

HISTORY

• Plate armour became more popular as firearm technology became more prevalent during the 13th century
• Historically designed with sculpted ridges and overlapping plates to provide reinforced protection and to deflect attacks on a chaotic battlefield

You’re a veteran fighter and been through your fair share of scrapes. Injuries, near deaths, and actual deaths that didn’t quite stick have been in your repertoire. That’s why, as a wise warrior, you take care to wear the best armour.

Your Captain Belt Shields protects your thighs from any wayward strikes. Whatever keeps you going strong!

DETAILS

Epic Armoury’s Captain Belt Shield are two plates designed to protect the thighs. These rolled edge steel plates hang from your own belt to cover the outer thighs, sliding into place using black leather loops securely fastened with rivets. Each plate is 25cm long and 19cm wide, with two 24cm folded leather loops.

The Captain’s Belt Shield armour features notches and overlapping welded plates, giving your armour a little extra detail that can be paired with a multitude of styles. This armour does not require assistance to equip, because it is very easy to put on and take off. Made of 1 mm thick galvanized mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

HISTORY

• Plate armour became more popular as firearm technology became more prevalent during the 13th century
• Historically designed with sculpted ridges and overlapping plates to provide reinforced protection and to deflect attacks on a chaotic battlefield

Epic Armoury Belt Shields are sold as a pair, excluding belt.

You move quickly, navigating the treacherous terrain. The rains have washed out the roads and made traveling difficult, taking any trails and footprints along with it. On one hand this has made your job challenging as a scout, but it’s also slowed down any normal party traveling ahead.

Thanks to your simple and lightweight gear, including your Scout Belt Shields, you manage to spot trouble long before they could spot you. You’ll head back and tell your own group about the upcoming bandits.

DETAILS

Epic Armoury’s Scout Belt Shields are two plates designed to protect the thighs. These rolled edged steel plates hang from your own belt to cover the outer thighs, sliding into place using brown leather loops securely fastened with rivets. Each plate is 25cm long and 21cm wide, with two 24cm folded leather loops.

The Scout’s Belt Shield armour is designed to be simple, giving you the freedom to customize your character’s costume by pairing it with a multitude of styles. This armour also does not require assistance to equip, because it is very easy to put on and take off. Made of 1 mm thick galvanized mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

HISTORY

• Plate armour became more popular as firearm technology became more prevalent during the 13th century
• Historically designed with sculpted ridges and overlapping plates to provide reinforced protection and to deflect attacks on a chaotic battlefield

The elven army is an incredibly dangerous one, as its members have all trained longer than most mortals have been alive. You are a member of such army. Dressed in matching armour, you stand at attention with your nearly identical kindred, your Illumine Helmet like a crown thanks to it pointed crest.

There is no fear on your face as your Lady sits upon her stag and surveys the orcs before you. The orcs gather in their chaos, their numbers far out matching your own. But still you do not fear, for every elf is worth at least ten of the enemy.

DETAILS

Epic Armoury’s Illumine tassets is a style of tassets inspired by the elven warriors of fantasy. Designed to protect the side of your waist and hips during combat, the Illumine tassets are sleek and elegant, as well as functional. Enjoy this easy to wear design, demanding attention on the battlefield with such details as the pointed crest and curved lines.

This high-fantasy armour is secured by tightening the leather straps around a belt. Made of 1 mm thick mild steel and top-grain leather straps and fittings, this armour piece is finished with a brass coating that gives it a particularly regal appearance. With regular leather and metal armour care, it will last for many seasons.

INSPIRATION

• Designed with a rounded shape to disperse the force of attacks on a chaotic battlefield
• Plate armour became more popular as firearm technology became more prevalent during the 13th century

THE WARRIORS OF THE NORTH SHALL NEVER SURRENDER

Epic Armoury’s Dreki Belt Shields are a set of tassets that can be paired with your own leather belt to act as detachable tassets- these robust rust covered steel plates efficiently protect the the front of your thighs and their detachable nature ensures unbridled--but protected--movement. With overlapping plates, rivets and its lean form, you can feel like a fantasy norsemen, braving the harsh wilderness and slaying ancient dragons among snow covered peaks.

The Dreki set has two colours, the primary being a Matte Polish and the secondary being Epic Dark, to highlight different aspects of the Dreki armour and again show its Nordic inspired roots. Made of 1 mm thick polished mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

INSPIRATION

• Based in fantasy inspired Nordic Armour such as Skyrim,Dark Souls and modern depictions in other fictional media