Edward Belt Shields

Belt shields to match the torso armor in our updated Edward series.

Material: Steel.
Length: 28 cm.
Width: 25 cm.

Mytholon Belt Shields are sold as singles, excluding belt.

Mytholons belt shields can be painted in groups colours, insignia or heraldry to show the membership to a certain group.

Matching the "Balthasar" series, this shield is decorated with rivets and a beading along the edge. It is worn on a belt by using the two loops on the top to hoist it through there. Naturally it can be worn as a tasset, when fastened on the upper thigh. This way you will have an additional plate armour piece. The belt shields, just like Mytholons arm shields, cry out to be painted, modded and to be combined with existing clothing. This is, where your creativity and immagination comes into place.

Speaking of creativity: We suggest to clean the shield with Acetone prior to painting it. Afterwards just sand it with a 600 grit sandpaper. Use some automobile colour primer as a base. When that is fully dried, you should sand it again and apply a second layer of colour. Once thats dried you can paint your details, like heraldry, animals and writings with weatherproof acrylic paint.

Mytholon Belt Shields are sold as singles, excluding belt.

This small belt shield completes the "Galahad" torso armour.
Use the two buckles to strap it to the centre part of the chest plate and to cover up the unprotected parts in your crotch.
It may be a small armour piece, but it brings a huge effect to any armour, as it can be used to paint heraldic colours on it.
This shield can also be added to any exsisting armour, but may need some handiwork to get it attached.

DON’T HIT BELOW THE BELT!

“I tried to gut it! Figured it might have a soft spot beneath that cursed armour. Well, I was wrong or too slow! Doesn’t matter. That day I lost both my hand and rondel, but at least I live to tell about it. The constant pain in my crippled arm is a reminder to you all. Never fight these ruinous monsters unless you plan to die!”

The Marauder Belt Shields provide unyielding, ruinous protection, and is made from mild steel in Epic Dark and Epic Grey colours to emphasise a sinister and unholy origin. They are designed with star-shaped place-holder screws that are replaceable with mountable accessories such as the Mountable Demon Horns.

Intimidation. It’s your main form of weaponry while facing the heroes, because it gives you full control. When your enemies fear you, they are more likely to make fatal mistakes.

Your Dark Drake Armour is as dark as your intentions, hardened by the evil magic your subjects provide. As you withdraw your sword, sizing up the quivering soldier who feels brave enough to stand against you, you begin to laugh. This will be a very brief fight--if you can even call it that. The little man looks barely strong enough to hold up his hammer.

DETAILS

Epic Armoury’s Dark Drake Breastplate is a finely sculpted piece of armour that protects the front of the torso, chest and abdomen. Sculpted to fit the body and add structural strength to the steel, this galvanized steel piece has been decorated to mimic reptilian scales. The plate rests at the hips and has a V-shaped flange--or sword turner--that deflects blows from the weak spot where torso and leg armour fit together. The armour is made from rolled mild steel treated with Epic Armoury’s Epic Dark Metal coat, which gives the armour a rugged, antique finish.

The Dark Drake Breastplate is designed to match Epic Armoury’s Dark Drake Armour, but is fully usable with other Epic Armoury metal products, giving you the freedom to customize your character’s costume. Made of 1 mm thick galvanized mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care. 

HISTORY

• Plate armour became more popular as firearm technology became more prevalent during the 13th century
• Historically designed with sculpted ridges to provide reinforced protection and to deflect attacks on a chaotic battlefield

Intimidation. It’s your main form of weaponry while facing the heroes, because it gives you full control. When your enemies fear you, they are more likely to make fatal mistakes.

Your Dark Drake Armour is as dark as your intentions, hardened by the evil magic your subjects provide. As you withdraw your sword, sizing up the quivering soldier who feels brave enough to stand against you, you begin to laugh. This will be a very brief fight--if you can even call it that. The little man looks barely strong enough to hold up his hammer.

DETAILS

Epic Armoury’s Dark Drake Breastplate is a finely sculpted piece of armour that protects the front of the torso, chest and abdomen. Sculpted to fit the body and add structural strength to the steel, this galvanized steel piece has been decorated to mimic reptilian scales. The plate rests at the hips and has a V-shaped flange--or sword turner--that deflects blows from the weak spot where torso and leg armour fit together. The armour is made from rolled mild steel treated with Epic Armoury’s Epic Dark Metal coat, which gives the armour a rugged, antique finish.

The Dark Drake Breastplate is designed to match Epic Armoury’s Dark Drake Armour, but is fully usable with other Epic Armoury metal products, giving you the freedom to customize your character’s costume. Made of 1 mm thick galvanized mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

HISTORY

• Plate armour became more popular as firearm technology became more prevalent during the 13th century
• Historically designed with sculpted ridges to provide reinforced protection and to deflect attacks on a chaotic battlefield

Your squire buckles the straps of your custom-fit Gothic Half Armour, adjusting it to be comfortable and snug over your gambeson. You paid top coin for this suit of plate, and you expect people will be impressed when they see how it shines on the battlefield.

Your blacksmith assured you that the Gothic Half Armour design was the latest in technology, able to withstand and deflect attacks--even arrows from the enemy’s bows. You are a mighty warrior, indeed, to be the owner of such fine craftsmanship. A fitting symbol of your godly-given status.

DETAILS

This bestselling armour is made for the upper crust of the battlefield, featuring front and backplates, faulds and tassets. The breast plate has a central crease and ridges around the rim. The armour is a close fit to the arms and throat to minimize the number of weak spots. The matching breast and backplates extend below the abdomen, connecting to the tassets beneath the protection of the faulds: a series of overlapping, modelled metal plates protecting the weak spots at the pelvis.

Made from mild steel with rolled edges and top-grain leather straps and fittings, this Gothic Half Armour is built to withstand the abuse of a LARP or reenactment while keeping the user safe and comfortable. With regular leather and metal armour care, you can expect this armour set to last for a long time!

HISTORY

• Gothic style historically developed in the 1420-1440s thanks to technological advances
• Characterized by the curves, flutes and ridges, which strengthened the armour and deflected projectiles

You look upon your leading officer as he makes his way down the line of your fellow soldiers. Your fate and the fate of your entire unit is dependent on this veteran’s word, and you find yourself relieved not to shoulder such a heavy burden.

“We must fight!” your officer shouts for all to hear. You adjust your Warrior Leg Protection, double checking the buckles as you listen to him continue. “For our homes and for our families, we will fight until we can fight no more!” With a resounding cheer, your fellow soldiers ready themselves for the charge. You withdraw your weapon, eager and afraid all at once.

The battle has begun.

DETAILS

Epic Armoury’s Warrior Leg Protection is a set of demi-greaves designed to protect the shins. Rounded at the edges and decorated with shiny steel rivets, these demi-greaves are designed to sit comfortably over the shins while leaving room for poleyns to cover the kneecaps. They reach from below the knee and narrow around the ankles, secured with a top-grain leather straps below the knee and another above the ankles.

The Warrior Leg Protection demi-greaves are neutral in style and fully usable with other Epic Armoury metal products, giving you the freedom to customize your character’s costume. Made of 1 mm thick mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

HISTORY

• Plate armour became more popular as firearm technology became more prevalent during the 13th century
• May also be referred to as a “schynbald,” only protecting the front of the lower leg