Hybrid Ranger Sword 85cm

Wherever you may roam and wander, your Ranger Sword is always by your side. Where you lay your head is home, and with your trusty steel by your side, you are always safe.

Your sword has seen you through countless battles, lain upon hundreds of stones, and been the last thing many orcs have ever seen. A ranger’s life is a hard one, but with a good sword at your side, it will always be yours.

DETAILS

Epic Armoury’s Ranger Sword is a 85 cm medium latex-hybrid sword inspired by medieval weapons and fantasy lore alike. The crossguard features an intricate curved design that protects a leather-like grip. This grip, wide by the crossguard and narrow toward the golden “scent stopper” pommel, is ergonomic in your hand.

Whether you are an elven scout or a rugged ranger, this Ranger Sword is one of our highest quality products due to its impressive durability and detail. The blade is made from closed cell foam around a fibreglass core and finished with a strong latex coating, while the handle is a polyurethane foam cast that allows for greater detail and no maintenance. This hybrid model sword will give you confidence in the safety and appeal of your weapon on the battlefield.

HISTORY

• Also referred to as a “Knightly sword” or “arming sword”
• Designed so that the center of mass was closer to the hilt, improving its maneuverability
• Typically used with a shield or buckler
• The pommel design is called a “scent stopper” design, popular in the 16th century

You’ve tried so many types of armour, but none ever seemed to work for you. Your torso was too big or too small; or you couldn’t bend or there wasn’t enough protection. That is until the blacksmith finally made you the Scouts Torso Armour.

This armour is perfect. It still offers solid metal protection to your heart and spine, and you are able to bend and stoop while scouting--an important element when attempting to hide from enemies. You only wish you’d found it sooner!

DETAILS

Epic Armoury’s Scouts Torso Armour is a simple low-fantasy breastplate and backplate protecting the upper torso. The plates comes down to the waist, allowing for increased flexibility compared to a traditional breastplate. Both the front and back plates are made from 1 mm thick mild steel, and are secured with top-grain leather straps at the shoulders and around the ribs.

Sculpted to fit the body and add structural strength to the steel, this steel riveted piece has been polished to a high-gloss finish to appeal to the knights in shining armour. The Scouts Torso Armour is neutral in style. Wear it alone or with shoulderguards and a helmet of your choice--we definitely recommend a gambeson! We also offer this style in several sizes to help accommodate different body types, and it’s built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

HISTORY

• Historically designed with a rounded shape to disperse the force of attacks on a chaotic battlefield
• Plate armour became more popular as firearm technology became more prevalent during the 13th century

YOU THINK THAT'S A KNIFE?

Epic Armoury’s Ranger Knife has an pragmatic and imposing look to itself. With a blade length of 17cm, it is a knife that is best used as backup for a ranger, with a pointed tip for penetrating skin with a sharp single-sided edge. The simple and authentic design makes the Range Knife perfect as secondary weapon, for either a Warrior, Marksman or a survivalist type character ala a Ranger. Made from durable closed cell foam and finished with a strong latex coating, you can feel confident that your LARP weapon will provide the safety and appeal you want when crafting a LARP kit.
The coreless nature of this particular model makes it suitable as a throwing weapon for many games and stab safe theatrical prop.

The underdark is your domain. In the pitch blackness, the smell of damp earth all around, you wait with your raiding party. When night falls on the lands above, you will emerge.

The sun-lovers have come to fear you and the silence in which you strike. With your Bone Blade, you are able to maneuver in the shadows until your target is exactly where you want them. You are formidable. You are the assassin.

DETAILS

Epic Armoury's Bone Blade is a dark-themed, one-handed chopping sword. The 66 cm curved single-edged blade is sculpted to look like sharp bone-white plates riveted onto a brazen core, giving it a deathly appearance. With a horned crossguard and bone pommel protecting the 15 cm split-leather wrapped handle, this dark weapon is a malevolent addition to any villain’s armoury.

Made from durable closed cell foam around a solid fibreglass core and finished with a strong latex coating, you can feel confident that your LARP weapon will provide the safety and appeal you want when crafting your battlefield kit.

INSPIRATION

• Design is inspired by dark elves, which were first mentioned in Norse mythology as the Dökkálfar or Svartálfar written in the Prose Edda in the 13th century
• J.R.R. Tolkien mentions dark elves, the “Moriquendi” in The Silmarillion
• Have also been referred to as “Drow” in the Dungeons & Dragons universe, made famous by R.A. Salvatore’s The Dark Elf Trilogy

Wheher it is an epic sword of flame, or a Blade of Bacon, the Hellfire is a weapon that will strike fear and jealousy into the hearts of your enemies.

War is all that you know. For your clan, war is a permanent state of being. Just as you need meat to sustain you and leather armour to protect your leathery green skin, war keeps your thirst for chaos and violence sated.

Your clan now gathers to prepare for the war against the goblins. The creatures used to be your allies, but in the last battle they became cowardly and ran. Now there is nothing more to be done than to hunt down every one of them and serve them over your fire.

You begin by picking up Hellfire, the blade that burns alongside your rage.

DETAILS

Epic Armoury’s Hellfire is a medium length sword designed as part of the Orc Universe collection. Carefully handpainted deep gradient reds and oranges, Hellfire appears to be burning from intense magic. The 60 cm double-edged blade is notched and worn, connected to a dark metal coloured crossguard which protects the 15 cm ergonomic handle. The handle is wrapped in split-leather for a secure and comfortable grip, and ends with a crudely gemmed pommel.

Made from durable closed cell foam around a fibreglass core and finished with a strong latex coating, you can feel confident that your LARP weapon will provide the safety and appeal you want when crafting your Orc-inspired kit.

INSPIRATION

• Earliest references to orcs are found in Old English and Anglo-Saxon sources, such as in Beowulf and in 16th century Italian folktales
• The word itself stems from the Latin word Orcus, which was the name given to the Roman deity of the dead
• J.R.R. Tolkien’s 20th century The Lord of the Rings series describes orcs as brutish, aggressive beings with a taste for human flesh
• Tolkien’s writings influenced many role-playing games, and are now seen in such games as Dungeons and Dragons, Warhammer and Warcraft

You strike your Leonidas sword against your shield, shouting alongside your legionaries outside the gates of Syracuse. Inside, their people are filled with terror, deafened by your army’s trumpets and noise. Arrows rain down and you and your fellow soldiers form a barrier with your shields.

There is nothing that can stop you. The design of your shield allows you to stand in close formation, advancing on their defenders and dispatching them quickly with your weapon.

DETAILS

Epic Armoury’s Sword of Leonidas is the perfect latex weapon for tackling one thousand descending nations and their armoured beasts all at once. Reminiscent of the modern bowie-knife, the Sword of Leonidas is a makhaira-type blade designed to effectively chop through your enemy. The 10 cm split-leather wrapped handle is protected by both the crossguard and pommel thanks to their hooked shape.

Made from durable closed cell foam around a fibreglass core and finished with a strong latex coating, you can feel confident that your LARP weapon will provide the safety and appeal you want when crafting your Spartan-inspired kit.

HISTORY

• Considered a makhaira-type blade, which is an ancient knife or sword with a single cutting edge
• Leaf design lent itself to both cutting and thrusting and has likely been around since the first swords created

Your Persian Blade is the namesake of your people. Quick and sharp--precise in accuracy, and cruel when necessary--it is more an extension of who you are than a mere weapon.

In the early morning you wake to begin your sword drills. Honing your skill will one day mean the difference between life and death in this violent world. When you join the army and march upon the Spartans, you look forward to finally testing your blade against the most deadly fighters in the world.

DETAILS

This bestselling Epic Armoury Persian Blade is a proper long sword, capable of taking on those pesky Spartans and their short blades and spears. The sword is 87 cm long from tip to pommel, with a 67 cm blade. The blade curves slightly and is thicker toward the tip with a false edge on the reverse side to give it the chopping and piercing power necessary to dominate a bloody battlefield. The handle with curled pommel is 16 cm long, rounded and bound in split-leather to give a comfortable and secure grip.

The blade is long and well-balanced making it a match for any Spartan you come across... provided you can get close enough to use it. Made from durable closed cell foam around a fibreglass core and finished with a strong latex coating, you can feel confident that your LARP weapon will provide the safety and appeal you want when crafting your kit.

HISTORY

• Persian swords are also referred to as a “Shamshir” or a “Scimitar”