Soldier Chainmail

The Soldier Chainmail is made of 1mm mild steel linked chain rings. For the riveted version, please see the Royal Soldier Chainmail design.

Epic Armoury metal works products should be treated with a wax or quality acid-free vegetable oil and kept in dry storage. Metal armour containing leather parts would needs a separate maintenance for the leather. Please read the "Leather Straps and Fittings" section below for leather cleaning and maintenance using leather-care products.

Degreasing and preparing your armour for use

When you open your armour, you may be overwhelmed by the smell of grease and oil. The oil has been applied to protect your armour during storage and transport. Use a degreasing product or mineral spirits and a dry cloth or paper towels to remove all the oil from your plate armour parts. Chainmail is a bit harder to remove all the oil from the links, but it can be done in much the same way. Wipe off as much as you can with a dry cloth, and with the remaining oil, you can remove the grease from the chainmail with mineral spirits or another solvent by spraying it on the links. You can also choose to fully submerge your chainmail in a degreasing product and use your hands to agitate the metal in the solution, this will completely remove all oil and grease from your links. After removal of the oil, make sure to dry your armour thoroughly. Strong, warm sunlight is great for drying your armour, but you can also use a hairdryer or a heat gun to speed up the process. Be careful not to overheat any leather parts when using a heat gun.

Cleaning

Moisture is the enemy of armour and chainmail. If your armour does get wet, it is important that you dry it thoroughly as soon as possible. After handling, wearing, or after six months of storage or display, all metal should be wiped with a clean cloth. Lightly oil the clean surface with a quality acid-free vegetable oil. Alternatively, you can apply a coating of wax to the entire surface of the exposed metal. Allow the wax to dry for a couple of hours and then buff it lightly with a soft cloth.

Rust-Prevention and Removal

Store your armour is a dry place and check it every couple of months for signs of rust. If any is found, remove it by gently rubbing the affected spot with a mildly abrasive pad dipped in wax or quality acid-free vegetable oil. Epic Dark products are specially treated to resist rust, but should still be treated with oil and kept in dry storage.

Leather Straps and Fittings

Clean by removing dirt with a hard brush, then gently rub on leather soap with a clean, damp cloth until the leather appears clean. Remove soap with a separate damp cloth to wipe away any soap residue and then use a dry cloth to wipe away any remaining water from the leather.

You should always condition leather after cleaning, since the soap will have removed some of its natural oils. Treat the leather with mink oil, olive oil, or beeswax polish with a clean cloth, gently rubbing a small amount of oil or polish in circles into the leather. Allow the leather to soak in the oil before wiping the leather with a final clean cloth to remove any excess residue.

There is a price to pay for armour. Armour protects your precious body - your one and only - but it has great weight and great material cost. No normal person can afford the blacksmith when desiring a suit of full plate. Thankfully, while your pocket is not deep, your skills are many.

You wear your minimal Soldier Belt Shields when you fight, because it doesn’t weigh you down. You are faster than your opponents...but also not so dumb as to go into a fight completely unprotected.

DETAILS

Epic Armoury’s Soldier Belt Shields are two plates designed to protect the thighs. These rolled edge steel plates hang from your own belt to cover the outer thighs, sliding into place using brown leather loops securely fastened with rivets. Each plate is 25cm long and 21cm wide, with two 24cm folded leather loops.

The Soldier Belt Shields armour features a curved edge and overlapping welded plates, influenced by the look of classic tassets that can be paired with a multitude of styles. This armour does not require assistance to equip, because it is very easy to put on and take off. Made of 1 mm thick galvanized mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

HISTORY

• Plate armour became more popular as firearm technology became more prevalent during the 13th century
• Historically designed with sculpted ridges and overlapping plates to provide reinforced protection and to deflect attacks on a chaotic battlefield

N.B.: Gorget / mounting point sold separately 

There isn’t time to slow down. The life of a fighter is fast. You move fast, fight fast, and even stand fast. It is also usually true that fighters are quick to fall. The battlefield is a place of chaos and violence, and you cannot afford to be held back by your armour--or this fight will be your last.

You wear your Soldier armour because it is practical and sturdy. Your Soldier Shoulders has taken numerous hits and never failed you. So, no matter the speed and the insanity, you can keep pace with the best of them.

DETAILS

Epic Armoury’s Soldier Shoulder is a set of two shoulder guards with spaulders and pauldrons. The spaulder is made from a single plate, shaped to provide protection to the upper arm. The large pauldrons are also made from one plate, curved to sit over the shoulders and overlap the breastplate. This design offers more protection to the otherwise vulnerable armpit. The shoulderplates are fastened with leather straps around the biceps and at the shoulder, tying to a breast- and backplate with an adjustable leather shoulder piece. Epic Armoury breast- and backplates can be purchased separately and have fittings for mounting the shoulders.

The Soldiers Shoulder has a neutral and simple style that easily matches other Epic Armoury metal products, giving you the freedom to customize your character’s costume. Made of 1 mm thick mild steel and chrome leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

HISTORY

• Historically designed with sculpted ridges and overlapping plates to provide reinforced protection and to deflect attacks on a chaotic battlefield
• Plate armour became more popular as firearm technology became more prevalent during the 13th century

Simple Design, Great Protection

Epic Armoury’s Soldier Gorget is designed to sit around the neck, providing protection to the thorax and shoulders. Handmade and molded to sit comfortably on the shoulders, this gorget offers some of the best protection for the battlefield without being overly ornate. This design makes for a practical look, easily transferred between multiple costumes or to fit a simple medieval soldier.

The Soldier’s Gorget is made from two pieces, one side secured with a bolt and the other closed with an adjustable leather strap. Attach it to your gambeson by threading canvas ties through the leather shoulder plates. With regular leather and metal care you can expect this quality made armour to last for a long time!

Inspired by Renaissance History

• Also referred to as a gorget, which means throat
• Early versions were typically worn under the breastplate and backplate to support the weight of the heavier plate armour
• Later versions were larger and designed to be worn over clothing

The villagers had easily been dispatched. Their pathetic field scythes were no match for the Warriros of Chaos and their darkened shadow blades.

However this was merely have meant to have been a raid, and they did not reckon on the auxilliary soldiers showing up with real weapons that had real reach, such as the soldiers and the steel halberds.

STAND FAST AND DEPLOY HALBARDS!

Epic Armoury’s Soldier's Halberd is a 190 cm latex poleaxe inspired by a weapon used during the late medieval period. The Halberd’s axe-like head has a 36 cm blade for chopping, a long spear for piercing, and a claw-like spike for grappling. The axe-head is specially reinforced to make the weapon durable and versatile. Handpainted and sculpted to appear realistic, detailed metal and bolts run along the pole, with a sheen that makes it appear like polished steel.

Made from durable closed cell foam around a fibreglass core and finished with a strong latex coating, you can feel confident that your LARP weapon will provide the safety and appeal you want when crafting your kit.

HISTORY

• Prominent during the 14th- and 15th centuries
• Term comes from the German words Halm (staff) and Barte (axe)
• Typically designed to keep mounted troops at a distance, but was considered versatile
• Spikes were added to the hammer’s head to grapple mounted opponents

The battle has lasted for three long days and the blood from both sides runs knee deep. You are exhausted and are unsure how much longer you can last when you see a break in the front lines. The enemy is making a last desperate push.

You are caught in front of their wave, and you feel the awful force of an enemy sword slash across your gut. Your Alaric Chainmail stops the blade from cutting, buying you the time to fight back and slay your foe.

DETAILS

Epic Armoury's new Epic Black Alaric Chainmail is a flexible mail armour shirt made from linked steel rings. The mail covers the body from the shoulder to the thighs, and has long sleeves protecting the arms to the wrists. Each butted ring interlocks with four other rings in a 4-in-1 design, while the armpits are reinforced with riveted rings designed to cope with additional stress. Treated with Epic Armoury’s Dark Metal coat to prevent rust, you can expect this armour to last a long time as reenactment gear with proper metal care.

The Alaric Chainmail is long sleeve mail great for heavy medieval infantry and sergeants, as well as early knights. Wear it over one of our gambesons for the most comfort and authentic wear. Pair this armour with additional Epic Armoury metal works and clothing to fit your character’s needs.

HISTORY

• One of the oldest types of armour in the world, still used today in modern protective technologies to protect against slashing
• Introduced in the 4th century B.C. around the famous battle between the Greeks and Persians at Thermopylae
• Popular in Roman and early medieval ages by infantry and early knights

The battle has lasted for three long days and the blood from both sides runs knee deep. You are exhausted and are unsure how much longer you can last when you see a break in the front lines. The enemy is making a last desperate push.

You are caught in front of their wave, and you feel the awful force of an enemy sword slash across your gut. Your Ragnar Chainmail stops the blade from cutting, buying you the time to fight back and slay your foe.

DETAILS

Epic Armoury's new Epic Black Ragnar Chainmail is a flexible mail armour shirt made from linked steel rings. The mail covers the body from the shoulder to the thighs, and has long sleeves protecting the arms to the wrists. Each butted ring interlocks with four other rings in a 4-in-1 design, while the armpits are reinforced with riveted rings designed to cope with additional stress. Treated with Epic Armoury’s Dark Metal coat to prevent rust, you can expect this armour to last a long time as reenactment gear with proper metal care.

The Ragnar Chainmail is long sleeve mail great for heavy medieval infantry and sergeants, as well as early knights. Wear it over one of our gambesons for the most comfort and authentic wear. Pair this armour with additional Epic Armoury metal works and clothing to fit your character’s needs.

HISTORY

• One of the oldest types of armour in the world, still used today in modern protective technologies to protect against slashing
• Introduced in the 4th century B.C. around the famous battle between the Greeks and Persians at Thermopylae
• Popular in Roman and early medieval ages by infantry and early knights

This classic 4-in-1 pattern short-sleeved chain mail was built for average sized adults. It is wide enough to be worn on top of a padded gambeson.

The sleeves cover some 2/3 of the arms - still being considered a short sleeve chain mail - and reaches down to the middle of your thigh.

We suggest to wear this chain mail with an average chest circumference from 90cm to 120cm, once gambeson is factored in. This way it can be worn in combination with a padded gambeson and can extend itself to a maximum width of 140cm circumference. A belt can help to distribute the weight properly.

The shiny version is fully galvanized and does not rust. Oiled and browned chainmails are ungalvanized and are supplied with a high lubrication. Please remove the excess oil before first use.

Ungalvanized chain shirts should be treated regularly with oil like Lannox MX4.

We need to be reminded sometimes that a battle lasts but a few minutes!

The Epic Armoury Captain Chainmail is effortless to put on and is comfortable to wear in Larp battle. This flexible mail tunic has hand-stiched leather edging with a series of buckles in the front for a quick fit. The mail covers the body from the shoulder to the thighs and has long sleeves. Each butted ring interlocks with four other rings in a 4-in-1 design. The armpits are reinforced with riveted rings designed to cope with the weight when lifting your arms during combat. This chainmail can easily be worn over a gambeson for more comfort and to prevent bruising in battle.

THE BATTLE IS FAR FROM OVER

Epic Armoury's unique Chainmail Sleeves are perfect to wear combined with torso armor or worn alone as added protection in battle. The mail protects the arms, shoulders and upper chest against all attacks while keeping you light and nimble in combat.

This chain armor is made from natural untreated steel butted 4-in-1 rings and has riveted flattened rings under the arms to prevent premature tear in battle. The chainmail is embellished with leather trim and attaches in the front by a series of buckles for a quick fit. For additional comfort when going to war, wear this chainmail over your gambeson.

Bring me my chainmail, it looks like we are going to war!

If your knightly soldier feels less protected, then consider Epic Armoury's Steel Scout Chainmail. It is a sleeveless ring mail shirt embellished with hand-stitched leather trim and has a practical buckled-down closure in the front. This butted chain mail torso armour is the perfect defence for the Larp soldier already equipped with arm protection. Furthermore, the leather buckles in the front of the armour allow the warrior to quickly put the hauberk over the gambeson before the battle. The butted ring design has a 4-in-1 pattern made from 1mm steel and is solid enough to endure intense roleplay combat. This ring shirt comes in various sizes, making it a fantastic addition to any medieval costume.

The knight's chainmail reveals his rank within the legion, knowing full well that he is the most protected.

If you are looking for chainmail with a dash of flamboyance, then consider Epic Armoury's Royal Captain Riveted Chainmail.

This medieval chainmail hauberk comes in several sizes and is all made using flat, riveted steel rings. Round rivets secure the rings into a traditional 4-in-1 pattern for outstanding durability in Larp Combat. The coat of mails falls to around the soldiers mid-thigh and can be opened from the front like a jacket using leather straps and strong buckles. Our long-sleeved chainmail is embellished bt a hand-stitched leather trim along the coat edges, making it a showpiece for historical reenactments, faires, and LARP battles. It is preferable to wear a gambeson beneath this chainmail for comfort and protection as you battle at your next roleplay event.

 Epic Armoury metal works products should be treated with a wax or quality acid-free vegetable oil and kept in dry storage. Metal armour containing leather parts require separate maintenance for the leather. Please read the "Leather Straps and Fittings" section below for leather cleaning and maintenance using leather-care products.

Degreasing and preparing your armour for use:

When you open your armour, you may be overwhelmed by the smell of grease and oil. The oil has been applied to protect your armour during storage and transport. Use a degreasing product or mineral spirits and a dry cloth or paper towels to remove all the oil from your plate armour parts. Chainmail is a bit harder to remove all the oil from the links, but it can be done in much the same way. Wipe off as much as you can with a dry cloth, and with the remaining oil, you can remove the grease from the chainmail with mineral spirits or another solvent by spraying it on the links. You can also choose to fully submerge your chainmail in a degreasing product and use your hands to agitate the metal in the solution, this will completely remove all oil and grease from your links. After removal of the oil, make sure to dry your armour thoroughly. Strong, warm sunlight is great for drying your armour, but you can also use a hairdryer or a heat gun to speed up the process. Be careful not to overheat any leather parts when using a heat gun.

Cleaning:

Moisture is the enemy of armour and chainmail. If your armour does get wet, it is important that you dry it thoroughly as soon as possible. After handling, wearing, or after six months of storage or display, all metal should be wiped with a clean cloth. Lightly oil the clean surface with a quality acid-free vegetable oil. Alternatively, you can apply a coating of wax to the entire surface of the exposed metal. Allow the wax to dry for a couple of hours and then buff it lightly with a soft cloth.

Rust-Prevention and Removal:

Store your armour in a dry place and check it every couple of months for signs of rust. If any is found, remove it by gently rubbing the affected spot with a mildly abrasive pad dipped in wax or quality acid-free vegetable oil. Epic Dark products are specially treated to resist rust, but should still be treated with oil and kept in dry storage.

Leather Straps and Fittings:

Clean by removing dirt with a hard brush, then gently rub on leather soap with a clean, damp cloth until the leather appears clean. Remove soap with a separate damp cloth to wipe away any soap residue and then use a dry cloth to wipe away any remaining water from the leather. You should always condition leather after cleaning, since the soap will have removed some of its natural oils. Treat the leather with mink oil, olive oil, or beeswax polish with a clean cloth, gently rubbing a small amount of oil or polish in circles into the leather. Allow the leather to soak in the oil before wiping the leather with a final clean cloth to remove any excess residue.