Markward Bracers

Like all parts of our "Markward" series, these bracers are simple in design, but look lean and elegant just like the "Markward" greaves. 
This impression is enhanced by a burr along the midsection. Additionally the burr strenghtens the steel construct.

The "Markward" torso armour consists of a breast- and backplate both of which are decorated with blank rivets. The two parts are connected with leather straps.

There are various parts you can expand your "Markward" torso with. Especially the other "Markward" armour parts are suitable for this. Get inspired by looking at our costume picture suggestions!

You look upon your leading officer as he makes his way down the line of your fellow soldiers. Your fate and the fate of your entire unit is dependent on this veteran’s word, and you find yourself relieved not to shoulder such a heavy burden.

“We must fight!” your officer shouts for all to hear. You adjust your Warrior Arm Protection, double checking the buckles as you listen to him continue. “For our homes and for our families, we will fight until we can fight no more!” With a resounding cheer, your fellow soldiers ready themselves for the charge. You withdraw your weapon, eager and afraid all at once.

The battle has begun.

DETAILS

Epic Armoury’s Warrior Arm Protection is a set of metal vambraces designed to protect the forearms from harm. Rounded at the edges and decorated with shiny steel rivets, these vambraces are designed to sit comfortably over the forearm, reaching from the elbow and narrowing at the wrists. Secure this armour with a top-grain leather strap below the elbow and another above the wrist.

The Warrior Arm Protection vambraces are neutral in style and fully usable with other Epic Armoury metal products, giving you the freedom to customize your character’s costume. Made of 1 mm thick mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

HISTORY

• Unlike popular belief, arm protection was only called a “bracer” if it was meant to protect the forearm of an archer. Actual forearm protection like this would have been called a “vambrace” or “forearm guard”
• Plate armour became more popular as firearm technology became more prevalent during the 13th century

"Adam" bracers are a little bit shorter than their cousins from our other series. Because of this they will also fit adolescents or smaller people. 
Additionally, like all the other "Adam" armour parts, it has a corrugation along the rim.

Material: 1.2mm steel
Colour: blank, browned
Measurements: 20cm length, 17cm on top, 13cm on the bottom

Mytholon's Vigor armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour sets generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of any gender. 

The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of war based tabletop miniatures games that require hammers. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn but well cared for appearance. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand it is unique for every single set.

If you’d prefer your armour unburnished, and looking like a shiny warrior of light that constantly praises something, you can also easily remove the burnishing layer using a polishing cloth.

The vambraces are rather slender in comparison to the rest of the armour parts. For that reason, they will not hinder you when carrying a shield. They consist of three slightly curved segments and feature a comfortable cutout for your hand as well as slightly bent edges around the wrist, which significantly increase wearing comfort.

It goes without saying that all edges of these armour pieces are beaded.

Vambraces Measurements:

• Length: 34cm
• Circumference (upper strap): 24cm
• Circumference (lower strap): 13cm
• Weight (pair): approx. 1.5kg

The parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight.

Adjustments to several of the measurements are possible by carefully bending the respective armour parts.

Someone might say that you are a cruel person. The truth is that you aren’t cruel--but you certainly aren’t a hero, either. The Battle of Delle is not one for your homeland or for your own people, but the pay is good and the fighting even better.

Life as a mercenary has made you into a hardened and effective warrior, and while some call it ‘luck’ when your enemy’s sword slides off your RFB Arm Protection, you call it strategy. After all, now your enemy’s heart is a wide open target.

DETAILS

Epic Armoury’s Ready for Battle Arm Protection is an essential for any person intending to experience the battlefield. Protect your forearms from lucky sword attacks and the occasional wayward arrow. Due to these vambraces’ simple style, this is an armour solution that can be used across different genres and character-types.

Two leather straps are used to keep each of the RFB Arm Protection vambraces in place. Made of 1 mm thick mild steel and top-grain leather straps and fittings, these oxidation resistant coated armor pieces are built to withstand the abuse of a LARP or reenactment with regular leather and metal armor care.

HISTORY

• Unlike popular belief, arm protection was only called a “bracer” if it was meant to protect the forearm of an archer. Actual forearm protection like this would have been called a vambrace or forearm guard
• Plate armor became more popular as firearm technology became more prevalent during the 13th century

PICK UP / IN STORE AVAILABILITY ONLY

The best defence in life means nothing if it is eaten away by time and the elements, or even attacked from the inside.
And so it is with your own armour!
Humidity, expansion and contraction in the heat, UV radiation, rain, and the withering blows of your enemies all conspire to expose your armour to rust, but worse yet, your very own precious bodily fluids conspire to corrode it from the inside with their impurities and corruption! (which is why we only ever drink pure grain alcohol or rainwater)

You could coat your armour (and other metal objects) in a regular run of the mill lubricant, but many of them are actively hydrophobic. Great for metal but terrible for leather, cotton and other organic materials!

Lanox MX4 is a lanolin rich lubricant, and lanolin is the oil that is naturally produced by sheep to prevent them from shrinking in the rain and generally remain weather proof! It is superior to many artificial compounds and does not damage leathers or organic fibres.

Please note: Due to the pressurised nature of this product, it is NOT A PRODUCT THATCAN BE DELIVERED by standard courier. You will need to pick it up from us at a game or warehouse, or we may arrange for specialty couriers by request.

This product is available in store only and cannot be shipped as it is a pressurised container. Online orders placed for delivery will be cancelled.