Vigor Cuirass

Mytholon's Vigor armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour sets generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of any gender. 

The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of war based tabletop miniatures games that require hammers. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn but well cared for appearance. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand it is unique for every single set.

If you’d prefer your armour unburnished, and looking like a shiny warrior of light that constantly praises something, you can also easily remove the burnishing layer using a polishing cloth.

At the heart of "Vigor" is the broad torso armour, which the large bevor can be attached to using buckles. The torso armour consists of flexibly connected chest and back plates. The lower parts protecting the chest and back consist of moving plates. Two straps on either side are used to close the torso armour and adjust the fit.

It goes without saying that all edges of these armour pieces are beaded.

The parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight.

Adjustments to several of the measurements are possible by carefully bending the respective armour parts.

Torso Measurements:

• Chest width: 67cm
• Length (shoulders to lower segment): 55cm
• Width neck cutout: 18cm
• Weight: approx. 5.3kg

Torso Measurements:

• Chest width: 67cm
• Length (shoulders to lower segment): 55cm
• Width neck cutout: 18cm
• Weight: approx. 5.3kg

The greatest adventurers document their journeys for posterity, so that one day their tales might be retold and remembered. You are still awaiting your first big adventure, but you are ready.

Your Leather Diary is safely stored in your pack, and the moment something grand happens you will be able to write it down. Personally, you’re hoping for a dealing with a dragon--but just a small one. Maybe a kobold, to start.

DETAILS

Epic Armoury’s Leather Diary is a small book with approximately 200 blank pages. Whenever you need to write down information or record data, do it by staying in character. The paper is heavy and textured, gathered into 16-24 page bundles bound at the spine with a fine leather cord.

The cover is made from stenciled top-grain leather which protects the pages inside. It is secured closed using a short leather strap with a brass buckle. Use this diary as the start of a secret tome filled with mysterious or infernal scribbles, a treatise, or simply as a personal in-game diary.

HISTORY

• The earliest bound books in the Western world used parchment with leather-covered wooden covers
• Many luxury medieval books had covers decorated with stamping and tooling

Praise the Sun!

The Epic Armoury  Sun Hammer combines many of the lessons we have learnt over the past decade in the creation of what can only be described as "Anime Class" weapons. The ridiculous size of the hammer is off set by the new and rugged Hybrid cores, and the head has the special shock-absorber design to ensure that your opponents can make it back up in time for the next scene after they've found themselves blasting off again.

Inhaling the crisp mountain air, you decide that today is a good day. With your Sun Hammer in hand, you look forward to finding the meanest, scariest beast in these foothills--and defeating it with much gusto.

In good humor you strike forth, whistling an old folk song. Some might think you insane. Maybe you are. But then, you rather prefer being called a dwarven berserker, instead.

DETAILS

Epic Armoury’s Sun Hammer is a 135cm latex hammer uniquely designed to be safer and easier to wield in combat. The Sun Hammer’s 39cm long head is asymmetrical, featuring a flat 20cm wide face on one end and a spike on the other. The head is hollow, making it safer to use and more lightweight than a foam alternative. Sculpted and hand painted to look like dwarven forged metal, the head is attached to a similarly decorated haft and a 49cm black leather wrapped grip.

The haft is made from durable closed cell foam around a fibreglass core and finished with a strong latex coating. The head is made of strong, flexible latex with an interior foam rod to maintain its shape and keep the head attached to the haft. With regular latex maintenance, your LARP weapon will provide the safety and aesthetic appeal fitting an epic character for years to come.

HISTORY

• A late medieval weapon designed to damage armoured opponents without penetrating through plate
• Long hammers were typically designed to fight against mounted troops, whereas shorter ones were used in close quarters
• Long hammers were also used to attack horse’s legs during combat

Mytholon's Vigor armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour sets generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of any gender. 

The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of war based tabletop miniatures games that require hammers. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn but well cared for appearance. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand it is unique for every single set.
If you’d prefer your armour unburnished, and looking like a shiny warrior of light that constantly praises something, you can also easily remove the burnishing layer using a polishing cloth.

The bevor contributes a lot to the armour sets brute look. It is easy to adorn with wax seals or emblazon it with your coat of arms. It consists of two interlaced moving segments; the interior front segment slants way down and rests against the torso, ensuring that neither your vision nor your breathing are impaired. The outer neck segment rests on the spaulders and is broad enough to offer full mobility for your head.

It goes without saying that all edges of these armour pieces are rounded.

The parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight.

Adjustments to several of the measurements are possible by carefully bending the respective armour parts.

Bevor Measurements:

• Front segment height: 20.5cm
• Neck segment height: 18cm
• Side height: 8cm
• Length (front to neck) 37cm
• Width (inner) front segment: 23cm
• Width (outer) neck segment: 28.5cm
• Weight: 1.6kg

Bevor Measurements:

• Front segment height: 20.5cm
• Neck segment height: 18cm
• Side height: 8cm
• Length (front to neck) 37cm
• Width (inner) front segment: 23cm
• Width (outer) neck segment: 28.5cm
• Weight: 1.6kg

Mytholon's Vigor armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour sets generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of any gender. 

The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of war based tabletop miniatures games that require hammers. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn but well cared for appearance. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand it is unique for every single set.

If you’d prefer your armour unburnished, and looking like a shiny warrior of light that constantly praises something, you can also easily remove the burnishing layer using a polishing cloth.

The armour belt is long enough even for broader hips and features three tassets. These are suspended from the belt from loops so that their position can be adjusted individually. In order to reduce the armour belt’s size, you can remove the central tasset and thus shorten the belt’s circumference.

It goes without saying that all edges of these armour pieces are beaded.

The parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight.

Adjustments to several of the measurements are possible by carefully bending the respective armour parts.

Measurements

Armour belt:

• Length: approx. 160cm
• Width approx. 2.8cm

Side tassets:

• Width (top): 47cm
• Width (bottom): 24cm
• Length: 36cm
• Weight (each): approx. 1.8kg

Central tasset:

• Width (top): 36cm
• Width (bottom): 13cm
• Length: 34.5cm
• Weight: approx. 1.3kg

Measurements

Armour belt:

• Length: approx. 160cm
• Width approx. 2.8cm

Side tassets:

• Width (top): 47cm
• Width (bottom): 24cm
• Length: 36cm
• Weight (each): approx. 1.8kg

Central tasset:

• Width (top): 36cm
• Width (bottom): 13cm
• Length: 34.5cm
• Weight: approx. 1.3kg

Mytholon's Vigor armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour sets generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of any gender. 

The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of war based tabletop miniatures games that require hammers. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn but well cared for appearance. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand it is unique for every single set.

If you’d prefer your armour unburnished, and looking like a shiny warrior of light that constantly praises something, you can also easily remove the burnishing layer using a polishing cloth.

The mighty spaulders consist of seven segments and also feature segmented upper arm protection. All the parts are connected flexibly and allow a maximum in freedom of movement.

It goes without saying that all edges of these armour pieces are beaded.

Material: steel, leather

The parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight.
Adjustments to several of the measurements are possible by carefully bending the respective armour parts.

Material: steel, leather

The parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight.
Adjustments to several of the measurements are possible by carefully bending the respective armour parts.

Mytholon's Vigor armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour sets generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of any gender. 

The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of war based tabletop miniatures games that require hammers. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn but well cared for appearance. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand it is unique for every single set.

If you’d prefer your armour unburnished, and looking like a shiny warrior of light that constantly praises something, you can also easily remove the burnishing layer using a polishing cloth.

The greaves are long enough to also protect the wearer’s knees. The upper part is articulated making movements such as kneeling easier. The sweeping knee protection is another design element of this armour set giving it its bold characteristics. Broad cutouts for your feet, as well as bent edges, increase comfort for longer wearing.

It goes without saying that all edges of these armour pieces are beaded.

The parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight.

Adjustments to several of the measurements are possible by carefully bending the respective armour parts.

Greaves Measurements:

• Length: 52cm
• Circumference (upper strap): 26cm
• Circumference (lower strap): 20cm
• Weight (pair): approx. 4kg

Greaves Measurements:

• Length: 52cm
• Circumference (upper strap): 26cm
• Circumference (lower strap): 20cm
• Weight (pair): approx. 4kg

Mytholon's Vigor armour was designed for the more imposing characters on the battlefield – referring not only to their formidable fighting style. This armour sets generous dimensions make it comfortable for longer periods of time even for powerfully built warriors of any gender. 

The style is reminiscent of the massive armour suits familiar from certain well-known manufacturers of war based tabletop miniatures games that require hammers. The oversized bevor in particular lends the armour suit its exceptional look. "Vigor" is slightly burnished, giving the armour pieces a worn but well cared for appearance. The burnishing procedure may cause small spots similar to rain spatters. As the finish is applied individually for hand it is unique for every single set.

If you’d prefer your armour unburnished, and looking like a shiny warrior of light that constantly praises something, you can also easily remove the burnishing layer using a polishing cloth.

The vambraces are rather slender in comparison to the rest of the armour parts. For that reason, they will not hinder you when carrying a shield. They consist of three slightly curved segments and feature a comfortable cutout for your hand as well as slightly bent edges around the wrist, which significantly increase wearing comfort.

It goes without saying that all edges of these armour pieces are beaded.

The parts of this armour set are manufactured by hand. For this reason, we ask you to allow for slight deviations in measurements and weight.

Adjustments to several of the measurements are possible by carefully bending the respective armour parts.

Vambraces Measurements:

• Length: 34cm
• Circumference (upper strap): 24cm
• Circumference (lower strap): 13cm
• Weight (pair): approx. 1.5kg

Vambraces Measurements:

• Length: 34cm
• Circumference (upper strap): 24cm
• Circumference (lower strap): 13cm
• Weight (pair): approx. 1.5kg

Coming soon - This product is not YET in stock

In the midst an epic battle, Dorgen Largebellows crushed the skull of his enemy in a single swing. His hammer had once again brought down a foe. Raising his head - and beard - high, the warrior looked at what was left of the horde in front of him. He held his hammer high, threatening. In a moment, all were fleeing and he was left alone.

Years before those events, the Dwarf had the great idea to forge himself a hammer fitting to his ambitions. He declared that this idea was a great one, and that they should wait and see the results. After months of hard work, he had the weapon to prove he was the greatest blacksmith, and ready for battle.

Workshop

The Dorgen Hammer is part of the Seyrawryn universe, created by Martial Grisé. This hammer, while looking incredibly real, is in fact perfectly safe thanks to its Calimacil foam. The grip has a leather texture and is adorned with a steel pommel, while the wooden handle holds the steel-coloured heads. A green emerald sits atop of this unique weapon. Its heads are hollow for safe LARP combat, and its Calimacil foam material ensures its durability for years of adventures.

Characters

Perfect for dwarven characters, this hammer will also suit brutes of a more rough nature, such as Trolls, barbarians and other monsters. Great to show some status and prestige, this LARP weapon is adapted to noblemen and women alike. However, it can also be used by the more common folk, like stoneworkers who enjoy their work.

Founded in 2004 in the cold windswept plains of the eastern Canada, Calimacil set out from its inception to become a world-class supplier of high-end LARP and historical re-enactment foam weapons. Our lavishly decorated designs are inspired by the martial lore of history, legends and stories taken directly from the dreamscapes of heroic fantasy. Our products are manufactured by an eager band of artisans made of passionate LARP players, martial arts practitioners and hardcore gamers. Playing is a fundamental part of the company's ethos as it focuses our creative energies and drives us to create new exciting weapons models. best foam weapon to play with.

An impressive looking torso armour composed of many flexible segments. These interlocking components leave a lot more freedom of movement to the wearer than normal torso plates and make it less obstructive in battle.

Intimidation. It’s your main form of weaponry while facing the heroes, because it gives you full control. When your enemies fear you, they are more likely to make fatal mistakes.

Your Dark Drake Armour is as dark as your intentions, hardened by the evil magic your subjects provide. As you withdraw your sword, sizing up the quivering soldier who feels brave enough to stand against you, you begin to laugh. This will be a very brief fight--if you can even call it that. The little man looks barely strong enough to hold up his hammer.

DETAILS

Epic Armoury’s Dark Drake Breastplate is a finely sculpted piece of armour that protects the front of the torso, chest and abdomen. Sculpted to fit the body and add structural strength to the steel, this galvanized steel piece has been decorated to mimic reptilian scales. The plate rests at the hips and has a V-shaped flange--or sword turner--that deflects blows from the weak spot where torso and leg armour fit together. The armour is made from rolled mild steel treated with Epic Armoury’s Epic Dark Metal coat, which gives the armour a rugged, antique finish.

The Dark Drake Breastplate is designed to match Epic Armoury’s Dark Drake Armour, but is fully usable with other Epic Armoury metal products, giving you the freedom to customize your character’s costume. Made of 1 mm thick galvanized mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

HISTORY

• Plate armour became more popular as firearm technology became more prevalent during the 13th century
• Historically designed with sculpted ridges to provide reinforced protection and to deflect attacks on a chaotic battlefield

Your squire buckles the straps of your custom-fit Gothic Half Armour, adjusting it to be comfortable and snug over your gambeson. You paid top coin for this suit of plate, and you expect people will be impressed when they see how it shines on the battlefield.

Your blacksmith assured you that the Gothic Half Armour design was the latest in technology, able to withstand and deflect attacks--even arrows from the enemy’s bows. You are a mighty warrior, indeed, to be the owner of such fine craftsmanship. A fitting symbol of your godly-given status.

DETAILS

This bestselling armour is made for the upper crust of the battlefield, featuring front and backplates, faulds and tassets. The breast plate has a central crease and ridges around the rim. The armour is a close fit to the arms and throat to minimize the number of weak spots. The matching breast and backplates extend below the abdomen, connecting to the tassets beneath the protection of the faulds: a series of overlapping, modelled metal plates protecting the weak spots at the pelvis.

Made from mild steel with rolled edges and top-grain leather straps and fittings, this Gothic Half Armour is built to withstand the abuse of a LARP or reenactment while keeping the user safe and comfortable. With regular leather and metal armour care, you can expect this armour set to last for a long time!

HISTORY

• Gothic style historically developed in the 1420-1440s thanks to technological advances
• Characterized by the curves, flutes and ridges, which strengthened the armour and deflected projectiles

They approached the entrace to the abandoned temple. Treme casting his glance at the incredibly lifelike statue that stood at the gate.
Too life like. Like its eyes were following him. But that was ridiculous. No one had been here in years and any magics would have long since wickered away.
No, there couldn't be anyone here. The only person that even knew this place existed was the strange man at the tavern that seemed far too emotionally attached to his obviously fake beard and heavy, clanky, armour.

You watch the caravan coming up the road from far off, counting at least two guards and a handful of merchants. Only one of them is on horseback, with the cart pulled by a sad pair of mules.

You feel confident in your new Rogue Torso armour, smirking as you signal to your fellows who lie in the shadows. There may not be much to steal, but you and your mates will take it all.

DETAILS

Epic Armoury’s Epic Dark Rogue Torso is a cuirass made from leather and steel. This breastplate circles the neck in a narrow U-shape, with the steel chest protecting the thorax before sloping around the ribcage to protect under the arms. The steel plate is fitted on brown leather using heavy-duty rivets, and is secured using straps around the back and across the shoulderblades. The lower edge of the breast plate rounds to fit against the crest of the hips, dipping down into a point at the front. This design is mimicked by the overlapped leather plate, which also serves as an anchor for the Rogue Tassets.

The Rogue Torso is designed to match Epic Armoury’s Rogue Armour, but is fully usable with other Epic Armoury metal products, giving you the freedom to customize your character’s costume. Made of 1 mm thick galvanized mild steel and top-grain leather, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

HISTORY

• Plate armour became more popular as firearm technology became more prevalent during the 13th century
• Historically designed with sculpted ridges and overlapping plates to provide reinforced protection and to deflect attacks on a chaotic battlefield

THE WARRIORS OF THE NORTH SHALL NEVER SURRENDER

Epic Armoury’s Dreki is a Imposing and rugged piece of armour protecting the front and back of the torso and abdomen. Consisting of overlapping steel plates that forms a breastplate and an attached steel backplate, this armour is sculpted to fit the body after securing the leather straps at the shoulders and around the sides of your frame comfortably. With overlapping plates, rivets and its lean form, you can feel like a fantasy norsemen, braving the harsh wilderness and slaying ancient dragons among snow covered peaks.

The Dreki Cuirass is has two colours, the primary being a Matte Polish and the secondary being Epic Dark, to highlight different aspects of the Dreki armour and again show its Nordic inspired roots. Made of 1 mm thick polished mild steel and top-grain leather straps and fittings, this armour piece is built to withstand the abuse of a LARP or reenactment with regular leather and metal armour care.

INSPIRATION

• Based in fantasy inspired Nordic Armour such as Skyrim,Dark Souls and modern depictions in other fictional media

The "Rikomer" plate armor is the brother of our "Dragomir" armor. Elaborately manufactured, it consists of a large number of lames and elements that, when combined, result in an extraordinary armor that can hardly be more agile. Every part from Rikomer is carefully flanged and coordinated with one another. Unlike "Dragomir", this armor is not decorated with beads and thus has an uncompromising, brutal look that contrasts with the finely shaped parts. Rikomer impresses with its design and the masterful execution that makes this armor so unique. It is also a more affordable than its brother "Dragomir".

Armor like this is usually only available as a custom-made product and we had to fiddle a long time before we could get it ready for serial production. Of course, the fit must and can be optimized here and there by careful bending, but we have designed the armor in such a way that it can be carried into the field with maximum comfort. The individual parts are burnished to protect them from rust, making the Rikomer burnished particularly suitable for dark knights and fighters of chaos.

We generally recommend wearing a gambeson and arm and leg paddings under plate armor. This significantly improves wearing comfort and protection.

The most gracious Bone Queen has granted you eternal life. She is the creator and goddess of the Undead Flesh, and she demands the extinction of every settler! Without tiring and with the constant assistance of the necromancers, you will personally see that every one of the mortal settlers be vanquished.

You are one of the Bone Queen’s corpse warriors, a Loyal, and it is with your help that the Undead Flesh will one day reconquest their own lands.

DETAILS

Epic Armoury’s CQ Undead Heavy Deal armour set includes CQ Undead Breastplate, Backplate, Shoulder Plates, Full Legs, Arm and Leg Protection, Tabard and Belt in order to fully gear your costume needs at a lower cost. Each armour piece is made from 1 mm galvanized mild steel and top-grain leather, built to withstand the abuse of a LARP or reenactment while keeping the user safe and comfortable. With regular metal and leather armour care, you can expect this armour set to last for a long time!

HISTORY

• Used as the uniform of choice for Undead Flesh, an NPC group of enemies within the ConQuest universe

The Official Conquest Undead Armour.

Made especially for Europe's largest LARP game, Conquest, this armour is made from 18 gauge steel and attached with strap and buckles. We recommend a gambeson underneath it.

This set is available in medium or large sizings.

Comes with

• Arm protection
• Leg Protection
• Belt
• Tabard
• Shoulder Plates / Pauldrons
• Neck Protection / Gorget
• Breast plate
• Back Plate
• Upper Leg protection / Tassets
• Full leg protection

N.B. This set does not include the Undead Helmet or Undead Gauntlets, but the Undead Set - Complete does.

Key Features